Rear - A&D TM-2657P Instruction Manual

Rear

No. Name
SELECT button
1
▲ button
2
COUNT button
3
4 Bitmap SD socket cover
5 Arm cuff cover
6 Cuff section
7 Armrest
8 External input/output unit
POWER switch
9
Cover for pressure
10
inspection area
AC INPUT connector
11
12 Security slot
Used to change functions.
If pressed when the number of measurements to date is
displayed, the number of measurements is printed.
Used to change functions.
Displays the number of measurements to date. (See "12.5.
Checking the number of measurements")
Use for only maintenance.
Inner cover of the cuff.
Holds the arm cuff cover.
Location to rest the arm during measurement.
The optional external input/output unit.
Switches the power on and off.
Once the power is switched on, the monitor will be in the
standby mode.
Used to check pressure accuracy.
Insert the power cable.
Can be used with a security cable to secure the monitor to
a desk or pole. (For theft prevention)
9
Description