Before Use; Monitor Installation; Power Connection; Security Slot - A&D TM-2657P Instruction Manual

See the precautions at the beginning of this manual and install the monitor in an appropriate location
using a safe and correct method.

6.1. Monitor installation

Attaching the armrest
Place the monitor on a stand so that measurement can be
performed in an appropriate posture. In an appropriate posture,
the patient's heart and the cuff should be at the same height
and the patient should be relaxed.
While referring to the illustration below, attach the armrest
to the rear side of the monitor.
To prevent theft, we recommend using a chain to connect
the security slot and stand. (See "6.3. Security slot")

6.2. Power connection

To avoid the risk of electric shock, the monitor must only be connected to a
■
supply mains with protective earth.
Use the 3-pole power cable provided with
the monitor to connect between the AC
INPUT connector and an electrical outlet.

6.3. Security slot

The monitor can be secured to a table or pole by passing a security cable through the hole of the
protruding tab on the monitor to secure it.

BEFORE USE

6.
Warning
11
cuff
3-pole power cable