15.2. Sending bitmaps
When sending bitmaps, connect the SD card for maintenance.
1. Switch off the power of the monitor.
2. With the COUNT, ▲ and SELECT buttons pressed, switch the power on. The monitor
enters the bitmap transfer mode.
3. Insert the SD card containing the bitmap file (Logo.bmp) saved in "15.1. Size of original
bitmap patterns" into the SD socket. Data transfer begins.
After transfer, restart the power, and then set the function
blood pressure value is printed after blood pressure measurement.
Bitmap SD socket cover
F15
to
51
2
. A bitmap to match the