Preliminary Remarks - A&D TM-2657P Instruction Manual

<Bluetooth （External input/output unit : only TM-2657-05）>

Preliminary Remarks

The WML-40AH is approved in accordance to R&TTE directive transmitter module marked by
, manufactured by MITSUMI incorporated to OEM product.
The device complies with part 15 of the FCC rules and contains the FCC ID POOWML-C40.
Compliance with Industry Canada.IC: 4250A-WMLC40.
The device is a Continua certified, Bluetooth wireless technology enabled medical device.
Transmission specifications
main standard Bluetooth Ver.2.1 class1
Supported profiles SPP,HDP
●Continua certified devices
●iPhone、iPad、iPod
●Applications and devices that are compatible with SSP and A&D specifications
However, each device needs an application to receive data.
For connection methods, refer to the manual for each device.
Devices that can
be connected
Pairing
A Bluetooth device needs to be paired with a different specific device in order to communicate
with that device. If this monitor is paired with a receiver device from the start, measurement data
is transmitted automatically to the receiver device each time a measurement is made.
Pairing procedure
1. Follow the instructions in the manual of the receiver device to switch it to the pairable status.
When pairing this monitor, place it as close as possible to the receiver device to be paired
with.
2. Turn the POWER switch on.
The monitor will be in a state that can be found by the receiver device for about one minute.
3. Follow the manual of the pairing receiver device to search for, select and pair with this monitor.
If a PIN code is requested by the receiver device, enter "123456".
4. If pairing fails, turn the POWER switch off and try steps 1-3 again.
※ After the pairing, all transmission are performed automatically.
Bluetooth devices described the
Bluetooth logo mark.
Continua certified devices described
the Continua logo mark.
iPhone, iPad and iPod are trademarks
of Apple Inc., registered in the U.S. and
other countries.
33