Alarm On/Off Mark On The Display; Selecting The Correct Cuff; Applying The Arm Cuff - A&D UA-789 XL Instruction Manual

Hide thumbs Also See for UA-789 XL:
Table of Contents

Advertisement

Alarm ON/OFF Mark On The Display

When the alarm is on, a "p" appears on the LCD. To turn the alarm off, simply
press the
CLOCK
alarm sound, press the

Selecting The Correct Cuff

Using the correct cuff size is important for an accurate reading. If the cuff is not
the proper size, the reading may yield an incorrect blood pressure value.
The arm size is printed on each cuff.
The arm cuff is a consumable. If it becomes worn, purchase a new one.
Arm Size
32 cm to 45 cm
42 cm to 60 cm
Arm size: The circumference at the biceps.
Note: Model UA-789XL is not designed for using a small adult cuff.
Symbols printed on the cuff.
Symbols Function / Meaning
Artery position mark
Catalog number
REF
Lot number

Applying The Arm Cuff

1. Wrap the cuff around the upper arm,
about 1 to 2 cm above the inside of the
elbow, as shown.
Place the cuff directly against the skin, as
clothing may cause a faint pulse and
result in a measurement error.
2. Constriction of the upper arm, caused by
rolling up a shirtsleeve, may prevent
accurate readings.
Using The Monitor
button once. The alarm will sound for 1 minute. To stop the
button once.
START
Recommended Cuff Size
Extra large adult cuff
Set the
in line with the ring finger on the inside of the arm.
English 8
Large adult cuff
Recommended Action
mark on the artery of the upper arm or
Do not roll up shirtsleeve tightly
Cuff
Secure the fabric
fastener firmly
Catalog Number
CUF-D-LA
CUF-B-XLA
1 to 2 cm
Artery position mark
Air hose

Advertisement

Table of Contents
loading

Table of Contents