10.13. Transmission speed (Mini-DIN)
The Mini-DIN
transmission speed can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
1200 bps
2400 bps
4800 bps
9600 bps
10.14. Transmission speed (D-Sub)
The D-Sub
transmission speed can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
1200 bps
2400 bps
4800 bps
9600 bps
10.15. Stop bit (Mini-DIN)
The stop bit ( Mini-DIN
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
Stop bit 1
Stop bit 2
10.16. Stop bit (D-Sub)
The stop bit ( D-Sub
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
Stop bit 1
Stop bit 2
10.17. Blood pressure result output
The blood pressure result output can be set using the function
Use the ▲ button to change the setting. The setting item appears in the diastolic display section.
DIA LED
RB (no ID, immediately after measurement) + STD
RI (with ID, immediately after measurement) + STD
BP (with ID, immediately after measurement) only
STD (command response) only
RA (with ID, immediately after measurement)
For details on transmission printing, contact the local A&D dealer.
Transmission speed (Mini-DIN)
Transmission speed (D-Sub)
) can be set using the function
Stop bit (Mini-DIN)
) can be set using the function
Stop bit (D-Sub)
Blood pressure result output
F21
F22
F23
.
F24
.
F25
.
28
.
Default
.
Default
Default
Default
Default