Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
area-id ——The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
interface-name interface-number——Specify the interface name and number to
display the LSA request list on this interface.
neighbor-id——Specify neighbor router ID to display the LSA request list on this
neighbor.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display LSA request list of Area 0 in process1:
T2700G-28TQ# show ip ospf 1 area 0 request-list
show ip ospf area retransmission-list
Description
The show ip ospf area retransmission-list command is used to display the
LSA retransmission list of the specified area.
Syntax
show ip ospf process-id area area-id retransmission-list [ interface-name
interface-number | neighbor-id ]
Parameter
process-id —— The process ID, ranging from 1 to 65535.
area-id —— The area ID, in the format of an IP address in dotted decimal
notation or decimal value ranging from 0 to 4294967295.
interface-name interface-number —— Specify the interface name and number
to display the LSA retransmission list on this interface.
neighbor-id —— Specify neighbor router ID to display the LSA retransmission
list on this neighbor.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display LSA retransmission list of Area 0 in process1:
403
Advertisement
Table of Contents
