TP-Link T2700G-28TQ Cli Reference Manual page 31

Jetstream 28-port gigabit stackable l2+ managed switch

Hide thumbs Also See for T2700G-28TQ:

Table of Contents

JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide

Firstly configure the Telnet login mode as "login" and the connection password as 456 in the

prompted DOS screen shown in Figure 1-12.

Now, you can logon by Telnet in login mode:

Open Telnet, then type telnet 192.168.0.1 in the command prompt shown as Figure 1-13, and

press the Enter button.

Figure 1-12 Configure login mode

Figure 1-13 Connecting to the Switch