Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
area virtual-link authentication-key
Description
The area virtual-link authentication-key command is used to configure the
simple authentication key. To delete the key, please use the no area virtual-link
authentication-key command.
Syntax
area transit-area virtual-link router-id authentication-key { [ 0 ] password | 7
encrypted-password }
no area transit-area virtual-link router-id authentication-key
Parameter
transit-area —— The transition area ID, in the format of an IP address in dotted
decimal notation or decimal value ranging from 0 to 4294967295.
router-id —— The ID of the neighboring router on the other endpoint of the
virtual link, in the format of dotted decimal notation.
0 —— Specify the encryption type. 0 indicates that an unencrypted password
will follow. By default, the encryption type is 0.
password —— Super password, a string from 1 to 8 alphanumeric characters or
symbols. The password is case sensitive, allows spaces but ignores leading
spaces, and cannot contain question marks. By default, it is empty.
7 —— Indicates a symmetric encrypted password with a fixed length will follow.
encrypted-password —— A symmetric encrypted password with a fixed length,
which you can copy from another switch configuration. After the encrypted
password is configured, you should use the corresponding unencrypted
password if you re-enter this mode.
Command Mode
Router Configuration Mode
User Guidelines
If the password you configured here is unencrypted and the global encryption
function is enabled in
configuration file will be displayed in the symmetric encrypted form.
service
password-encryption, the password in the
384
Advertisement
Table of Contents
