T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
ip ospf retransmit-interval
Description
The ip ospf retransmit-interval command is used to configure the interval to
retransmit the LSA, DD and LSR packets on the specified interface. To restore
to default value, please use the no ip ospf retransmit-interval command.
Syntax
ip ospf retransmit-interval interval
no ip ospf retransmit-interval
Parameter
interval—— The retransmit interval, ranging from 1 to 65535 seconds. The
default value is 5 seconds.
Command Mode
Interface Configuration Mode
Example
Configure the retransmission interval of interface VLAN 2 as 10 seconds:
T2700G-28TQ(config)# interface vlan 2
T2700G-28TQ(config-if)# ip ospf retransmit-interval 10
ip ospf transmit-delay
Description
The ip ospf transmit-delay is used to configure the transmission delay of LSA
on the specified interface. To restore to default value, please use the no ip ospf
transmit-delay.
Syntax
ip ospf transmit-delay delay
no ip ospf transmit-delay
Parameter
delay—— The LSA transmission delay, ranging from 1 to 65535 seconds. The
default value is 1 second.
387