Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
5.
Configure the port selected in the step above as the following Figure 1-4 shown. Configure
Bits per second as 38400, Data bits as 8, Parity as None, Stop bits as 1, Flow control as
None, and then click OK.
6.
The DOS prompt "T2700G-28TQ>" will appear after pressing the Enter button as Figure 1-5
shown. It indicates that you can use the CLI now.
Figure 1-4 Port Settings
Figure 1-5 Log in the Switch
7
Advertisement
Table of Contents
