Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
2.
You are prompted to enter the connection password 456 you have set through Console port
connection, and then you are in User EXEC Mode.
3.
When entering enable command to access Privileged EXEC Mode, you are required to give
the password 123 you have set through Console port connection.
Now you can manage your switch with CLI commands through Telnet connection.
Note:
You can refer to
Chapter 12 User Manage Commands
Telnet connection configuration.
Figure 1-14 Enter into the User EXEC Mode
Figure 1-15 Enter into the Privileged EXEC Mode
for detailed commands information of the
12
Advertisement
Table of Contents
