Table of Contents
Advertisement
T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
3. Type the default user name and password (both of them are admin), then press the Enter
button so as to enter User EXEC Mode.
Now you can manage your switch with CLI commands through Telnet connection.
4. Type enable command to enter Privileged EXEC Mode. A password that you have set
through Console port connection is required. Here the password has been set as 123.
Figure 1-10 Enter into the User EXEC Mode
Figure 1-11 Enter into the Privileged EXEC Mode
10
Advertisement
Table of Contents
