Lcd Unit/Touch Panel/Digitizer - Toshiba PORTÉGÉ M700 Maintenance Manual

4 Replacement Procedures

4.32 LCD unit/Touch panel/Digitizer

Removing the LCD unit/Touch panel/Digitizer
The following describes the procedure for removing the LCD unit/touch panel/digitizer. (See
Figure 4-50 to 4-54.)
1. Turn the display clockwise180 degrees and close the display on the palm rest cover.
2. Peel off the mask seals (9 points) from the LCD mask and remove the following
screws securing the LCD mask.
• M2.5×6.0B
3. Insert your fingers into the slits on both sides and remove the LCD mask while
releasing the latches.
M2.5x6.0B FLAT HEAD
(with mask seal)
LCD mask
M2.5x6.0B FLAT HEAD
(with mask seal)
4-84 [CONFIDENTIAL]
FLAT HEAD screw
Figure 4-51 Removing the LCD mask
4.32 LCD unit/Touch panel/Digitizer
×9
M2.5x6.0B FLAT HEAD
(with mask seal)
Slit
PORTÉGÉ M700 Maintenance Manual (960-661)