Toshiba PORTÉGÉ M700 Maintenance Manual page 175

Then the test returns to the ONLY ONE TEST menu automatically after a
while.
Don't turn off the power by any means until the ONLY ONE TEST menu
appears again.
The following error message is displayed when the digitizer is out of order.
"Press any key!"
If any key is pressed, the computer will reboot in order to rewrite the program
of the digitizer.
Then the test returns to the ONLY ONE TEST menu automatically after a
while.
Don't turn off the power by any means until the ONLY ONE TEST menu
appears again
Subtest D
Intel Kedron (SKU/MAC)
The functional check of
Subtest E S
mart Card
This section describes how to perform the SmartCard test. To execute the
SmartCard test, refer to the following description.
SmartCard is put into a slot.
SmartCard test is read from CD media..
If it is OK, the following message will come out.
ATR = xxxxxxxxxxx
Return : Success
If it is not Card, the following message will come out.
Please Insert Smart card!
Waiting for you...
If it is Card Back, the following message will come out.
Maybe Smart card Inserted Back wards!
Return : Get ATR failed!
If it is NG, the following message will come out.
02SCR Initial failed!!!
PORTEGE M700 Maintenance Manual (960-661)
and a MAC Address check are carried out.
Kedron
(SmartCard model only)
3 Tests and Diagnostics
Rev C
[CONFIDENTIAL] 3-53