System Board - Toshiba PORTÉGÉ M700 Maintenance Manual

Hide thumbs Also See for PORTÉGÉ M700:

Table of Contents

4.21 System board

3. Turn up the black sheet and peel off the acetate tape.

4. Lift up the system board and disconnect the sensor cable from the connector

CN9530 on the system board.

NOTE: Do not try to remove the system board with the sensor cable being connected.

5. Peel off the acetate tape and remove the modem jack from the slot.

6. Remove the system board form the cover assembly.

Acetate tape

Sensor cable

(Connected to CN9530)

PORTÉGÉ M700 Maintenance Manual (960-661)

Acetate tape

Figure 4-38 Removing the system board (2)

4 Replacement Procedures

System board

Bluetooth cable

[CONFIDENTIAL]

Table of Contents