Toshiba PORTÉGÉ M700 Maintenance Manual page 236

4 Replacement Procedures
Screw Tightening Torque
Use the following torque when tightening screws.
CAUTION: Overtightening can damage components and screws; undertightening can
result in electrical shorts or other damage if screws or components come
loose.
NOTE: Toshiba recommends that you use an electric screwdriver for quick and easy
operations.
•
M2 (2mm)
•
M2.5 (2.5mm)
•
M3 (3mm)
NOTE: To prevent damage to THIN HEAD screws, use type 0 bit philips screwdriver.
Press along the axis of the screwdriver while turning the screw. This is because
the contact area between the screw and driver is less than for a pan head screw
(standard pan-shaped screw head).
4-8 [CONFIDENTIAL]
0.167 N•m (1.7 kgf •cm)
0.294 N•m(3.0 kgf•cm)
0.549 N•m(5.6 kgf•cm)
PORTÉGÉ M700 Maintenance Manual (960-661)
4.1 Overview