Toshiba PORTÉGÉ M700 Maintenance Manual page 284

4 Replacement Procedures
6. Set the flat plate under the fan so that stress is not given to the assembly while
disassembling and assembling.
7. Remove the following screws and separate the fan and heat sink.
• M2.5×4.0B
NOTE: Remove/Install the fan on the flat plate.
Heat sink
4-56 [CONFIDENTIAL]
FLAT HEAD screw
Figure 4-33 Removing the fan
PORTÉGÉ M700 Maintenance Manual (960-661)
4.20 Fan/Heat sink/CPU
×2
M2.5x4.0B FLAT HEAD
Flat plate
Fan