Toshiba PORTÉGÉ M700 Maintenance Manual page 311

4.31 Hinge assembly
Installing the Hinge assembly
The following describes the procedure for installing the hinge assembly. (See Figure 4-48
and 4-49.)
1. Set the hinge spacer, hinge assembly and cable holder in place and secure them
with the following screws.
• M2.5×10.0B FLAT HEAD screw
2. Return the display counterclockwise in the original position and close the display.
3. Arrange the cables carefully as shown in the Figure 4-48 to the guides of the cable
holder.
PORTÉGÉ M700 Maintenance Manual (960-661)
4 Replacement Procedures
×2
[CONFIDENTIAL] 4-83