Page 1 Toshiba Personal Computer PORTÉGÉ M700 PORTÉGÉ M750 Maintenance Manual 3G & SmartCard (Rev B) Degitizer utility(Rev C) M750 (Rev D) TOSHIBA CORPORATION File Number 960-661 First Edition [CONFIDENTIAL]...
Page 2 © 2007 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the information contained herein.
Page 3 NOTE: “Note” contains general information that relates to your safe maintenance service. Improper repair of the computer may result in safety hazards. Toshiba requires service technicians and authorized dealers or service providers to ensure the following safety precautions are adhered to strictly.
Page 4 The manual is divided into the following parts: Chapter 1 Hardware Overview describes the T PORTÉGÉ M700/M750. system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems. Chapter 3 Test and Diagnostics describes how to perform test and diagnostic operations for maintenance service.
Page 5 Conventions This manual uses the following formats to describe, identify, and highlight terms and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition. For example: Read Only Memory (ROM) Keys Keys are used in the text to describe many operations.
Page 6: Table Of Contents
Table of Contents Chapter 1 Hardware Overview Features ........................1-1 System Unit Block Diagram ..................1-9 3.5-inch Floppy Disk Drive (USB External) ............1-17 2.5-inch Hard Disk Drive..................1-18 DVD-Super Multi Drive Optical Drive (ODD) ............1-20 Keyboard......................... 1- 23 TFT Color Display....................
Page 7 2.16 Tablet pen Troubleshooting ..................2-54 2.17 Touch screen Troubleshooting................. 2-56 2.18 Sound Troubleshooting.................... 2-58 2.19 Bridge media Slot Troubleshooting ................. 2-60 2.20 Fingerprint sensor Troubleshooting................. 2-61 2.21 3G Troubleshooting ....................2-65 2.22 SmartCard Slot Troubleshooting ................2-67 Chapter 3 Tests and Diagnostics The Diagnostic Test ....................
Page 8 3.24 Floppy Disk Drive Utilities..................3-60 3.25 System Configuration ....................3-65 3.26 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC)..3-67 3.27 Wireless LAN Test Program on DUT PC(Intel-made )........... 3-72 3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program ..........3-80 3.29 Sound Test program....................
Page 9 4.23 MDC ........................4-66 4.24 PC card slot ......................4-68 4.25 Smart card slot (Smart card model only) ..............4-70 4.26 Battery cable holder ....................4-72 4.27 Pen holder assembly ....................4-73 4.28 Sensor board......................4-74 4.29 Touch pad........................ 4-75 4.30 Speaker........................
Page 10: Chapter 1 Hardware Overview
Chapter 1 Hardware Overview [CONFIDENTIAL]...
Page 11 1 Hardware Overview 1-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 12 1 Hardware Overview Chapter 1 Contents Features........................1-1 System Unit Block Diagram..................1-9 3.5-inch Floppy Disk Drive (USB External)............1-17 2.5-inch Hard Disk Drive ..................1-18 DVD-Super Multi Drive Optical Drive (ODD)............1-20 Keyboard .........................1- 23 TFT Color Display ....................1- 24 Power Supply......................1- 25 Batteries........................1- 28 1.9.1 Main Battery ..................1- 28 1.9.2...
Page 13 1 Hardware Overview Figures Figure 1-1 Front of the computer ..................1- 6 Figure 1-2 System unit configuration................1- 7 Figure 1-3 System unit block diagram ................1- 9 Figure 1-4 3.5-inch FDD (USB External) ..............1- 17 Figure 1-5 2.5-inch HDD ....................1- 18 Figure 1-6 Keyboard .....................1- 23 Figure 1-7...
Page 14: Features
1 Hardware Overview Features The Toshiba PORTEGE M700 ,M750 Personal Computer uses extensive Large Scale Integration (LSI), and Complementary Metal-Oxide Semiconductor (CMOS) technology extensively to provide compact size, minimum weight, low power usage and high reliability. This computer incorporates the following features.
Page 15 1 Hardware Overview PORTÉGÉ M750 Equipped with Intel Cantiga GM as North Bridge, Intel ICH9-M/-E as South Bridge and Ricoh R5C847 as Card Controller. VGA Controller An internal Graphics Controller in North Bridge is used. Memory PORTÉGÉ M700 The computer comes with two PC4300(DDR2-533)/PC5300(DDR2-667) SO-DIMM slots.
Page 16 1 Hardware Overview External monitor : Supported via an RGB connector. Digitizer A digitizer is installed at the rear of LCD unit. The supplied tablet pen enables pen computing. Tablet pen / Reserve pen The Tablet pen / Reserve pen can be used as a mouse by touching the display softly with the pen tip.
Page 17 1 Hardware Overview One eSATA/USB combo port, which complies to. The USB 2.0 standard is provided. This port has eSATA (External Serial ATA) function. A power supply is always supplied to one USB ports on the left side of a computer. IEEE 1394 port The computer comes with one IEEE 1394 port.
Page 18 1 Hardware Overview Sound system The sound system is equipped with the following features: • speakers • Volume control • Stereo headphone jack • External microphone jack • Built-in microphone Internal modem The computer contains a MDC, enabling data and fax communication. It supports ITU-T V.90 (V.92).
Page 19: Figure 1-1 Front Of The Computer
1 Hardware Overview The computer is equipped with Bluetooth (V2.1+EDR) communications standard enable wireless connection between electronic devices such as computers and printers. It supports wireless communication switch. Switch/Button The following switches and buttons are equipped. - Power on switch - Cross Function button - ESC/Rotation button - Windows-Security tablet button...
Page 20 1 Hardware Overview Rev B The system unit configuration is shown in figure 1-2. Figure 1-2-a M700 System unit configuration PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 21 1 Hardware Overview Figure 1-3-b M750 System unit configuration [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 22: System Unit Block Diagram
1 Hardware Overview System Unit Block Diagram Figure 1-3 is a block diagram of the system unit. Figure 1-4-a M700 System unit block diagram PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 23 1 Hardware Overview Figure 1-5-b M750 System unit block diagram 1-10 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 24 1 Hardware Overview The system unit is composed of the following major components: Processor PORTÉGÉ M700 ® Intel Core 2 Duo(Merom-4M or 2M) T7800 (2.60GHz),T7700 (2.40GHz),T7500 (2.20GHz) L2=4MB (M700 only) T7250 (2.00GHz) L2=2MB (M700 only) T5870(2.00GHz),T5670(1.8GHz),L2=2MB (M750 only) – Integrated L1 cache memory of 64KB (32KB +32KB) –...
Page 25 1 Hardware Overview PORTÉGÉ M750 Tow memory slots capable of accepting DDR2-SDRAM 1024MB , 2048MB or 4096MB memory modules for a maximum of 8GB. • 200-pin Small Outline DIMM • 1.8V operation • PC6400(DDR2-800) support North Bridge PORTÉGÉ M700 • Intel 965:Crestline-GM –...
Page 26 1 Hardware Overview – PCI Bus I/F Rev2.3 (6 PCI REQ/GNT Pairs) – Integrated Serial ATA Host Controller (3 Prots,300MB/S) – Integrated IDE Controller (Ultra ATA 100/66/33) – Intel High Definition controller (Azalia) – USB 1.1/2.0 Controller 10 ports – Built-in LAN controller (IEEE 802.3 compliance) –...
Page 27 1 Hardware Overview – Serial Interrupt Function – Suspend/Resume control – Built –in RTC – GPIO – 672-ball 31×31×2.49 Max mm BGA Package Cardbus controller PORTÉGÉ M700 (TI PCI8412ZHK) − PCI Interface(PCI Rev.2.3) − CardBus / Ultra media Controller (1 socket) −...
Page 28 1 Hardware Overview • Stereo headphone jack • External microphone jack • Built-in microphone Modem Controller One MDC is used. This controller has the following functions: • One RJ11 port • Azalia MDC • V.92 (V.90) 56K Modem/FAX • Ring wake up support •...
Page 29 1 Hardware Overview • Intel Shirley Peak a/b/g/n or Echo Peak a/b/g/n +WiMAX . Bluetooth PORTÉGÉ M700 • V2.0 module • Antenna built-in PORTÉGÉ M750 • V2.1 module • Antenna built-in Sensor • Thermal Sensor: One ADM1032ARMZ chip is used. •...
Page 30: Inch Floppy Disk Drive (Usb External)
1 Hardware Overview 3.5-inch Floppy Disk Drive (USB External) The 3.5-inch FDD is a thin, high-performance reliable drive that supports 720KB (formatted) 2DD and 1.44MB (formatted) 2HD disks. The FDD is shown in figure 1-4. The specifications for the FDD are listed in Table 1-1. Figure 1-6 3.5-inch FDD (USB External) Table 1-1 3.5-inch FDD specifications TEAC FD-05PUB-337...
Page 31: Inch Hard Disk Drive
The HDD is shown in figure 1-5. Specifications are listed in Table 1-2. Figure 1-7 2.5-inch HDD Table 1-2 2.5-inch HDD specifications s (1/5) PORTÉGÉ M700 Item Specifications Maker Merker Code Parts Code 2.5"HDD 80GB TOSHIBA MK8037GSX HDD2D61BZL01 SATA 5400rpm HGST HTS542580K9SA00 G8BC0004D080 9.5mm FUJITSU MHY2080BH G8BC0004E080...
Page 32 200GB 7200rpm HGST HTS723220L9A360 G8BC0005F200 250GB 5400rpm HGST HTS543225L9SA00 G8BC00051250 FUJITSU MHZ2250BH G8BC00052251 or ***52 Item Specifications Maker Merker Code Parts Code 2.5"SDD 64GB TOSHIBA THNS064GE4BBDC(T) G8BC00059640 SATA 128GB TOSHIBA THNS128GE4BBDC(T) G8BC00059120 9.5mm 1-19 PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 33: Dvd-Super Multi Drive Optical Drive (Odd)
1 Hardware Overview DVD-Super Multi Drive Optical Drive (ODD) The DVD Super Multi drive accommodates either 12 cm (4.72-inch) or 8 cm (3.15-inch) CD-ROM, DVD-ROM, CD-R, CD-RW, DVD-R, DVD+R, DVD-RW, DVD+RW, DVD- RAM, DVD-R DL and DVD+R DL. The specifications are listed in Table 1-3. PORTÉGÉ...
Page 34 1 Hardware Overview Access time: Random (ms) CD-ROM 150msec typ. 150msec typ. DVD-ROM 180msec typ. 180msec typ. Supported Disks CD: CD/CD-ROM (12cm, 8cm), CD-R, CD-RW DVD:DVD-ROM, DVD-R, DVD+R, DVD-RW DVD+RW, DVD-RAM Supported Formats CD: Sound CD, CD-ROM, CD-R, CD-RW, Multi-session (Photo CD, CD extra) DVD:DVD-ROM, DVD-Video, DVD-R, DVD-R DL, DVD+R, DVD+R DL, DVD-RW, DVD+RW, DVD-RAM...
Page 35 1 Hardware Overview ATAPI Burst (MB/s) PIO Mode 16.6 (PIO MODE4) DMA Mode 16.6 (Multi Word Mode2) Ultra DMA Mode 33.3 (Ultra DMA Mode2) Data Buffer Capacity Access time: Random (ms) CD-ROM 150msec typ. DVD-ROM 180msec typ. Supported Disks CD: CD/CD-ROM (12cm, 8cm), CD-R, CD-RW DVD:DVD-ROM, DVD-R, DVD+R, DVD-RW DVD+RW, DVD-RAM Supported Formats...
Page 36: Keyboard
1 Hardware Overview Keyboard The keyboard is mounted 85(US)/87(UK) keys that consist of character key and control key, and in conformity with JIS. The keyboard is connected to membrane connector on the system board and controlled by the keyboard controller. Figure 1-6 is a view of the keyboard.
Page 37: Tft Color Display
1 Hardware Overview TFT Color Display The TFT color display consists of 12.1-inch WXGA LCD module. The LCD module used for the TFT color display uses a white LED backlight as the light source and can display a maximum of 16M colors with 1,200 x 800 resolution. The VGA in North Bridge can control internal and external WXGA support displays simultaneously.
Page 38: Power Supply
1 Hardware Overview Power Supply The power supply supplies many different voltages to the system board and performs the following functions: 1. Judges that the DC power supply (AC adapter) is connected to the computer. 2. Detects DC output and circuit malfunctions. 3.
Page 39: Table 1-6 Power Supply Output Rating
1 Hardware Overview Table 1-6 Power supply output rating (1/2) Type Voltage Device Name Remarks AMT not supported supported M Power P Power It is distinguishable by whether parts are M-E3V Clock Gen line line carried in System board. M Power P Power It is distinguishable by whether parts are IR25M-E1V...
Page 40: Portege M700/M750 Maintenance Manual (960-661) [Confidential
1 Hardware Overview Table 1-6 Power supply output rating (2/2) Type Voltage Device Name Remarks AMT not supported supported 3G-E3V E Power line SIM Card E Power line UIMPWR-E3V IR5-PIV P Power line Robson P Power line SPI Flash Memory(for LAN-E3V LAN- E Power line BIOS)
Page 41: Batteries
1 Hardware Overview Batteries The computer has three types of batteries as follows: Main battery pack RTC battery The battery specifications are listed in Table 1-7. Table 1-7 Battery specifications Battery name Material Output Capacity voltage Main battery G71C0007M510/G71C0007M61 4,700 mAh Lithium-Ion 10.8 V G71C0004S910/G71C0004SA10...
Page 42: Table 1-8 Time Required For Charges
1 Hardware Overview 1.9.2 Battery Charging Control Battery charging is controlled by a power supply microprocessor. The microprocessor controls whether the charge is on or off and detects a full charge when the AC adaptor and battery are attached to the computer. The system charges the battery. Battery Charge When the AC adaptor is attached, there are two types of charge: When the system is powered off and when the system is powered on.
Page 43: Table 1-9 Rtc Battery Charging/Data Preservation Time
1 Hardware Overview 1.9.3 RTC battery The RTC battery provides power to keep the current date, time and other setup information in memory while the computer is turned off. Table 1-9 lists the charging time and data preservation period of the RTC battery. Table 1-9 RTC battery charging/data preservation time Status Time...
Page 44: Ac Adaptor
1 Hardware Overview 1.10 AC Adapter The AC adapter is also used to charge the battery. Table 1-10 lists the AC adapter specifications. Table 1-10 AC adapter specifications Parameter Specification G71C0006R210 (3-pin) / G71C0006Q210 (2-pin) Power Input voltage 100V/240V Input frequency 50Hz to 60Hz Input current 5.0A or less (100V-240V 4Aload)
Page 45 1 Hardware Overview 1-32 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 46 uFCPGA 478 Sound CODEC Wengen20 (FWGNS*) Block Diagram Mic In/Internal Mic Clocks Socket-P ALC268 Speaker AN12948A ADM1032 Headphone (Thermal senser) Speaker AMP CK505 RJ11 ICS9LPR501 Penryn 48MHz P1.05V IMVP-6+ P1.5V (Voltage Regulator) M3.3V 667/800/1066MHz FCBGA 1329balls DDR2 667/800 Memory Channel A Ricoh Card Cont.
Page 47: Troubleshooting Procedures
Chapter 2 Troubleshooting Procedures [CONFIDENTIAL]...
Page 48 2 Troubleshooting Procedures 2-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 49 2 Troubleshooting Procedures Chapter 2 Contents Troubleshooting......................2-1 Troubleshooting Flowchart ..................2-2 Power Supply Troubleshooting ..................2-7 Procedure 1 Icons in the LCD Check...............2-7 Procedure 2 Error Code Check ................2-8 Procedure 3 Connection Check ..............2-13 Procedure 4 Charge Check................2-14 Procedure 5 Replacement Check..............2-15 System Board Troubleshooting ................2-16 Procedure 1 Message Check ................2-17...
Page 50 2 Troubleshooting Procedures Display Troubleshooting ..................2-41 Procedure 1 Diagnostic Test Program Execution Check .......2-41 Procedure 2 Connector Check and Replacement Check........2-41 Procedure 3 Replacement Check..............2-43 2.10 Optical Drive Troubleshooting.................2-44 Procedure 1 Diagnostic Test Program Execution Check .......2-44 Procedure 2 Connector Check and Replacement Check........2-44 2.11 LAN Troubleshooting ....................2-45 Procedure 1...
Page 51 2 Troubleshooting Procedures 2.18 Sound Troubleshooting ....................2-58 Procedure 1 Diagnostic Test Program Execution Check .......2-58 Procedure 2 Connector Check................2-58 Procedure 3 Replacement Check..............2-59 2.19 Bridge media Slot Troubleshooting................2-60 Procedure 1 Check on Windows OS ..............2-60 Procedure 2 Connector Check and Replacement Check........2-60 2.20 Fingerprint sensor Troubleshooting .................2-61 Procedure 1...
Page 52: Figure
2 Troubleshooting Procedures Figures Figure 2-1 Troubleshooting flowchart ..................2-3 Figure 2-2 Debug port (Boot mode) error status..............2-19 Tables Table 2-1 Battery icon......................2-7 Table 2-2 DC IN icon......................2-7 Table 2-3 Error code ......................2-8 Table 2-4 Result code ......................2-14 Table 2-5 Debug port (Boot mode) error status..............2-21 Table 2-6 FDD error code and status .................2-31 Table 2-7 HDD error code and status ................2-36 2-vi...
Page 53: Troubleshooting
2 Troubleshooting Procedures Rev B Troubleshooting Chapter 2 describes how to determine if a Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction. The FRUs covered are: 1. Power Supply 2. System Board 3. USB Floppy Disk Drive 4.
Page 54: Troubleshooting Flowchart
Ask the user if a password is registered and, if it is, ask him or her to enter the password. Make sure that Toshiba Windows is installed on the hard disk. Non-Toshiba operating systems can cause the computer malfunction. Make sure all optional equipment is removed from the computer.
Page 55 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (1/2) PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 56 2 Troubleshooting Procedures Figure 2-1 Troubleshooting flowchart (2/2) [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 57 2 Troubleshooting Procedures If the diagnostics program cannot detect an error, the problem may be intermittent. The Running Test program should be executed several times to isolate the problem. Check the Log Utilities function to confirm which diagnostic test detected an error, then perform the appropriate troubleshooting procedures as follows: 1.
Page 58 2 Troubleshooting Procedures Rev B 15. If an error is detected on the sound test, perform the Sound Troubleshooting Procedures in Section 2.18 16. If an error is detected on Bridge Media, perform the Bridge Media slot Troubleshooting Procedures in Section 2.19. 17.
Page 59: Power Supply Troubleshooting
2 Troubleshooting Procedures Power Supply Troubleshooting The power supply controls many functions and components. To determine if the power supply is functioning properly, start with Procedure 1 and continue with the other Procedures as instructed. The procedures described in this section are: Procedure 1: Icons in the LCD Check Procedure 2: Error Code Check Procedure 3: Connection Check...
Page 60: Procedure 2 Error Code Check
2 Troubleshooting Procedures Procedure 2 Error Code Check If the power supply microprocessor detects a malfunction, it indicates the error code as shown below. The error code begins with the least significant digit. Table 2-3 Error code Error code Where Error occurs AC Adaptor 1st Battery 2nd Battery...
Page 61 2 Troubleshooting Procedures Check 1 Compare the patterns in the hexadecimal error code to the tables below. AC Adaptor Error code Meaning AC Adaptor output voltage is over 16.5V. Express Port Replicator voltage is over 16.5V. Current from the DC power supply is over 7.70A. Current from the DC power supply is over 0.5A when there is no load.
Page 62 2 Troubleshooting Procedures E5V output Error code Meaning E5V voltage is over 6.00V when the computer is powered on/off. E5V voltage is under 4.50V when the computer is powered on. E5V voltage is under 4.50V when the computer is booting up. E5V voltage is under 4.50V when EV power is maintained and OUTV1=EV is designated.
Page 63 2 Troubleshooting Procedures PPV output Error code Meaning PPV voltage is over 1.80V when the computer is powered on/off. PPV voltage is under 0.32V when the computer is powered on. PPV voltage is under 0.32V when the computer is booting up. 1R05-P1V output Error code Meaning...
Page 64 2 Troubleshooting Procedures 1R05-P1V output Error code Meaning 1R05-P1V voltage is over 1.26V when the computer is powered on/off. 1R05-P1V voltage is under 0.89V when the computer is powered on. 1R05-P1V voltage is under 0.89V when the computer is booting up. Miscellaneous Error code Meaning...
Page 65: Procedure 3
2 Troubleshooting Procedures Procedure 3 Connection Check The power supply wiring diagram is shown below: Any of the connectors may be disconnected. Perform Check 1. Check 1 Disconnect the AC power cord from the wall outlet. Check the power cable for breaks.
Page 66: Procedure 4
2 Troubleshooting Procedures Procedure 4 Charge Check The power supply may not charge the battery pack. Perform the following procedures: 1. Reinstall the battery pack. 2. Attach the AC adaptor and turn on the power. If you cannot turn on the power, go to Procedure 5.
Page 67: Procedure 5
2 Troubleshooting Procedures Procedure 5 Replacement Check The system board processor module may be disconnected or damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures. Check the connection between the AC adaptor and system board and connection. After checking the connections, perform the following Check 1: Check 1 Replace the AC adaptor with a new one.
Page 68: System Board Troubleshooting
2 Troubleshooting Procedures System Board Troubleshooting This section describes how to determine if the system board and CPU are defective or not functioning properly. Start with Procedure 1 and continue with the other procedures as instructed. The procedures described in this section are: Procedure 1: Message Check Procedure 2: Printer Port LED Check on Boot Mode Procedure 3: Diagnostic Test Program Execution Check...
Page 69: Procedure 1
2 Troubleshooting Procedures Procedure 1 Message Check When the power is turned on, the system performs the Initial Reliability Test (IRT) installed in the BIOS ROM. The IRT tests each IC on the system board and initializes it. If an error message is shown on the display, perform Check 1. If there is no error message, go to Procedure 2.
Page 70 2 Troubleshooting Procedures Check 2 The IRT checks the system board. When the IRT detects an error, the system stops or an error message appears. If one of the following error messages (1) through (17), (22) or (23) appears, go to Procedure 4.
Page 71: Procedure 2
2 Troubleshooting Procedures Procedure 2 Debugging Port Check (Boot Mode) Check the D port status by a serial port test. The tool for serial port test is shown below. Figure 2-2 Debug port (Boot mode) error status The test procedures are follows: 1.
Page 72 2 Troubleshooting Procedures 4. Boot the computer in DOS mode. 5. Execute GETDPORT.COM in the text menu in CPU REAL mode. (Insert the FD for starting D port into FDD and input “FD starting drive:>dport”.) The D port status is displayed in the following form; 5.
Page 73 2 Troubleshooting Procedures Table 2-5 Debug port error status (1/6) D port Inspection items Target device IC number status setup of CPU , IS1050 (CPU Socket) Initialization of MCH , CPU, MCH(Register) IC1200 (MCH) Initialization of ICH , IC1600 (ICH) ICH(Register PIT EC access check, IC3200 (EC/KBC)
Page 74 2 Troubleshooting Procedures Table 2-5 Debug port error status (2/6) D port Inspection items Target device IC number status System BIOS IRT processing setup of CPU , IS1050 (CPU Socket) Initialization of ICH, CPU, ICH(PCI Register, IC1200 (MCH) IC1600 (ICH) MCH and Super I/O, PIT Controller), MCH(PCI F100...
Page 75 2 Troubleshooting Procedures Table 2-5 Debug port error status (3/6) D port Inspection items Target device IC number status Initialization of ICH (PIT), PIT initialization error, check of CPU, IC1000 (CLKGEN) check of ROM data, CPU, ICH(PIT Controller, IS1050 (CPU Socket) setup of SMI, F106 MEM I/O, CMOS, I/O),...
Page 76 2 Troubleshooting Procedures Table 2-5 Debug port error status (4/6) D port Inspection items Target device IC number status setup of PCI Express Card, ICH(PCI Register, MEM IC1600 (ICH, HDD Cont.) F10B I/O, IDE Controller), CN1900 (HDD Conn.) setup of HDD EC/KBC(EC), HDD IC3200 (EC/KBC) CN1400, CN1410 (RAM...
Page 77 2 Troubleshooting Procedures Table 2-5 Debug port error status (5/6) D port Inspection items Target device IC number status F118 setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F119 setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F11A setup of ICH (DMAC) ICH(DMAC) IC1600 (ICH) F11B...
Page 78 2 Troubleshooting Procedures Table 2-5 Debug port error status (6/6) D port Inspection items Target device IC number status HDD, ICH(IDE IC1600 (ICH, HDD Cont.) F125 setup of HDD Controller) CN1900 (HDD Conn.) F126 setup of a display IC1200 (VGA) CN1400, CN1410 (RAM F127 setup of RAM data...
Page 79 2 Troubleshooting Procedures NOTE: Status outputted by the test means the last error detected in the debug port test. PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 2-27...
Page 80: Procedure 3 Diagnostic Test Program Execution Check
2 Troubleshooting Procedures Procedure 3 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu. Refer to Chapter 3, Tests and Diagnostics, for more information on how to perform these tests. 1. System test 2. Memory test 3.
Page 81: Replacement Check
2 Troubleshooting Procedures Procedure 4 Replacement Check The system board connectors may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform Check 1. Check 1 Visually check for the following: a) Cracked or broken connector housing b) Damaged connector pins If their connectors are in good condition, but there is still a problem, go to Check Check 2...
Page 82: Usb Fdd Troubleshooting
2 Troubleshooting Procedures USB FDD Troubleshooting This section describes how to determine if the USB FDD is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: USB FDD Head Cleaning Check Procedure 2: Diagnostic Test Program Execution Check Procedure 3: Connector Check and Replacement Check Procedure 1...
Page 83 2 Troubleshooting Procedures Procedure 2 Diagnostic Test Program Execution Check Insert the Diagnostics Disk in the USB FDD, turn on the computer and run the test. Refer to Chapter 3, Tests and Diagnostics, for more information about the diagnostics test procedures. Floppy disk drive test error codes and their status names are listed in Table 2-6.
Page 84: Procedure 3 Connector Check
2 Troubleshooting Procedures Procedure 3 Connector Check The USB FDD is connected to the System Board. Check 1 When using the USB port, make sure the USB FDD cable is firmly connected to CN4612 , CN4611 or CN4610 on the System board. If any of the connections are loose, reconnect firmly and repeat Procedure 2.
Page 85: Hdd Troubleshooting
2 Troubleshooting Procedures HDD Troubleshooting This section describes how to determine if the HDD is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Message Check Procedure 2: Partition Check Procedure 3: Format Check Procedure 4: Diagnostic Test Program Execution Check Procedure 5: Connector Check and Replacement Check...
Page 86: Partition Check
Procedure 2 Partition Check Insert the Toshiba DOS system disk and restart the computer with U key holding down. Perform the following checks: Type C: and press Enter. If you cannot change to drive C, go to Check 2. If you Check 1 can change to drive C, go to Check 3.
Page 87: Format Check
Check 1 following message appears on the display, the HDD is formatted. Format complete If an error message appears on the display, refer to the Toshiba DOS Manual for more information and perform Check 2. Check 2 Using the Diagnostics Disk, format the HDD with a low level format option.
Page 88: Procedure 4 Diagnostic Test Program Execution Check
2 Troubleshooting Procedures Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnostics Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test program.
Page 89: Procedure 5 Connector Check And Replacement Check
2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check The HDD may be disconnected, or the HDD, HDD cable or system board may be damaged. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures and perform the following checks: Check 1 Make sure the HDD is firmly connected to CN1900 on the system board.
Page 90: Procedure 1 Diagnostic Test Program Execution Check
2 Troubleshooting Procedures Keyboard Troubleshooting To determine if the computer’s keyboard or touch pad is functioning properly, perform the following procedures. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check...
Page 91 2 Troubleshooting Procedures Check 3 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 2-39...
Page 92: Touch Pad Troubleshooting
2 Troubleshooting Procedures Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute the Touch pad test (ONLY ONE TEST) in the Diagnostic Program.
Page 93 2 Troubleshooting Procedures Check 2 Touch Pad or the cable may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still occurs, perform Check 3. Check 3 Touch pad board or the cable may be faulty. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures.
Page 94: Display Troubleshooting
2 Troubleshooting Procedures Display Troubleshooting This section describes how to determine if the computer’s display is functioning properly. Start with Procedure 1 and continue with the other procedures as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Cable Check Procedure 3: Replacement Check Procedure 1 Diagnostic Test Program Execution Check...
Page 95 2 Troubleshooting Procedures Procedure 3 Replacement Check The LCD module and system board are connected to display circuits. Any of these components may be damaged. Refer to Chapter 4, Replacement Procedures. Check 1 Replace the LCD cable with a new one following the instructions in Chapter 4, Replacement Procedures and test the display again.
Page 96: Optical Drive Troubleshooting
2 Troubleshooting Procedures 2.10 Optical Drive Troubleshooting To check if the optical drive (each CD-ROM, CD-R/RW+DVD-ROM drive) is defective or malfunctioning, follow the troubleshooting procedures below as instructed. Procedure 1 Diagnostic Test Program Execution Check Procedure 2 Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute the CD-ROM/DVD-ROM Test in the Diagnostic Program.
Page 97: Lan Troubleshooting
2 Troubleshooting Procedures 2.11 LAN Troubleshooting This section describes how to determine if the computer’s LAN is functioning properly. Perform the steps below starting with Procedure 1 and continue with the other procedures as required. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check...
Page 98: Bluetooth Troubleshooting
2 Troubleshooting Procedures 2.12 Bluetooth Troubleshooting This section describes how to determine if the computer’s Bluetooth is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connection Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check...
Page 99 2 Troubleshooting Procedures Check 2 The Bluetooth module may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures and check the operation. If the problem still exists, perform Check 3. Check 3 The Bluetooth cable may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures.
Page 100: Wireless Lan Troubleshooting
2 Troubleshooting Procedures 2.13 Wireless LAN Troubleshooting This section describes how to determine if the computer’s Wireless LAN is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Transmitting-Receiving Check Procedure 2: Antenna Connection Check Procedure 3: Replacement Check Procedure 1...
Page 101: Procedure 3 Replacement Check
2 Troubleshooting Procedures Check 1 Make sure the wireless LAN board is firmly connected to CN2600 on the system board. If the connector is disconnected, connect it firmly. If the wireless LAN board is still not functioning properly, perform Check 2. Check 2 Make sure the wireless LAN antenna cables are firmly connected to the wireless LAN board.
Page 102: Modem Troubleshooting
2 Troubleshooting Procedures 2.14 Modem Troubleshooting To check if modem is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Modem test in the LAN/Modem/Bluetooth/IEEE1394 test program.
Page 103 2 Troubleshooting Procedures Check 2 Modem cable or MDC cable may be faulty. Replace it with a new one. If the problem still occurs, perform Check 3. Check 3 MDC may be faulty. Replace it with a new one following the steps in Chapter 4, Replacement Procedure.
Page 104: Web Camera Troubleshooting
2 Troubleshooting Procedures 2.15 Web camera Troubleshooting To check if the computer’s web camera is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Check on Windows OS Procedure 2: Connector Check and Replacement Check Procedure 1 Check on Windows OS The web camera checks operating normally using the software of Windows OS attachment.
Page 105 2 Troubleshooting Procedures Check 3 The web camera/digitizer/fingerprint sensor /sw board cable may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures. If the problem still exists, perform Check 4. Check 4 The system board may be damaged. Replace it with a new one following the instructions in Chapter 4, Replacement Procedures.
Page 106: Tablet Pen Troubleshooting
2 Troubleshooting Procedures 2.16 Tablet Pen Troubleshooting To check if the Tablet Pen is defective or not, follow the troubleshooting procedures below as instructed. CAUTION: Use the Tablet Pen supplied to this model. Procedure 1: Check on Windows Vista Procedure 2: Tablet pen replacement Check Procedure 3: Connector Check and Replacement Check Procedure 1 Check on Windows Vista...
Page 107 2 Troubleshooting Procedures Procedure 3 Connector Check and Replacement Check The Digitizer is connected to the system board as below. Check 1 If any of the connections are loose, reconnect firmly and repeat Procedure 1and 2. If there is still an error, go to Check 2. Check 2 The Digitizer may be damaged.
Page 108: Touch Screen Troubleshooting
2 Troubleshooting Procedures 2.17 Touch screen Troubleshooting To check if the touch screen is defective or not, follow the troubleshooting procedures below as instructed. CAUTION: Use the touch screen supplied to this model. Procedure 1: Check on Windows Vista Procedure 2: Touch screen connector Check and Replacement Check Procedure 1 Check on Windows Vista This procedure checks if the touch screen is working properly by using the function of...
Page 109 2 Troubleshooting Procedures Procedure 2 Connector Check and Replacement Check The Digitizer is connected to the system board as below. Check 1 If any of the connections are loose, reconnect firmly and repeat Procedure 1. If there is still an error, go to Check 2. Check 2 The touch screen may be damaged.
Page 110: Procedure 2 Connector Check
2 Troubleshooting Procedures 2.18 Sound Troubleshooting This section describes how to determine if the computer’s sound functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Diagnostic Test Program Execution Check Procedure 2: Connector Check Procedure 3: Replacement Check Procedure 1...
Page 111 2 Troubleshooting Procedures Procedure 3 Replacement Check If headphone does not work properly, perform check 1. If external microphone does not work properly, perform check 2. If speaker does not work properly, perform check 3. If internal microphone does not work properly, perform check 4. Check 1 Headphone may be faulty.
Page 112: Bridge Media Slot Troubleshooting
2 Troubleshooting Procedures 2.19 Bridge media Slot Troubleshooting This section describes how to determine if the computer's Bridge media functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Check on Windows OS Procedure 2: Connector Check and Replacement Check Procedure 1 Check on Windows OS...
Page 113: Fingerprint Sensor Troubleshooting
2 Troubleshooting Procedures 2.20 Fingerprint sensor Troubleshooting CAUTION: To delete the account for confirming the fingerprint operation, it is necessary to log on by the account with the management authority. If the password has been set to log on, ask the Log-ON password to the user. To check if the Fingerprint sensor works correctly or not, follow the troubleshooting procedures below as instructed.
Page 114: Procedure 1
2 Troubleshooting Procedures Procedure 1 Setting Windows Log-ON password 1. Open [User Account] from [Control Panel]. 2. Click [User Account]. 3. Click the icon of the account (user’s name) that you want to set the password. 4. Click “Create Account”. 5.
Page 115: Authentication Of Fingerprint
2 Troubleshooting Procedures 7. When the Store to Sensor screen is displayed, check Store fingerprint to Sensor. Click Finish to complete fingerprint registration. Procedure 3 Authentication of fingerprint 1. Turn on the computer to start up Windows. 2. In the Windows logon window, put lightly the first joint of your finger registered and slide your finger sideways.
Page 116: Connector Check And Replacement Check
2 Troubleshooting Procedures Procedure 4 Connector Check and Replacement Check The Fingerprint sensor is connected to the system board as below. Check 1 If any of the connections are loose, reconnect firmly and repeat Procedure 1 to 3 . If there is still an error, go to Check 2. Check 2 The Fingerprint sensor may be damaged.
Page 117: Troubleshooting
2 Troubleshooting Procedures 2.21 3G Troubleshooting This section describes how to determine if the computer’s 3G is functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Transmitting-Receiving Check Procedure 2: Antenna Connection Check Procedure 3: Replacement Check Procedure 1 Transmitting-Receiving Check...
Page 118: Antenna Connection Check
2 Troubleshooting Procedures Procedure 2 Antenna Connection Check The 3G wiring diagram is shown below: Any of the connections may be disconnected. Disassemble the computer following the steps described in Chapter 4, Replacement Procedures, and perform the following checks: Check 1 Make sure the 3G antenna cables are firmly connected to the 3G card and FWGAN board.
Page 119: Smartcard Slot Troubleshooting
2 Troubleshooting Procedures 2.22 SmartCard Slot Troubleshooting (SmartCard model only) This section describes how to determine if the computer's SmartCard functions are functioning properly. Perform the steps below starting with Procedure 1 and continuing with the other procedures as required. Procedure 1: Check on T&D Procedure 2: Connector Check and Replacement Check Procedure 1...
Page 120: Tests And Diagnostics
Chapter 3 Tests and Diagnostics [CONFIDENTIAL]...
Page 121 3 Tests and Diagnostics 3-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 122 3 Tests and Diagnostics Chapter 3 Contents The Diagnostic Test ....................3-1 3.1.1 Diagnostics menu ................. 3-1 3.1.2 H/W (Hardware) initial information setting tool........3-4 3.1.3 Heatrun test program................3-4 Executing the Diagnostic Test ................... 3-5 3.2.1 Diagnostics menu (T&D) ..............3-6 3.2.2 H/W initial information setting tool .............
Page 123 3 Tests and Diagnostics Subtest 3 Wireless communication switch ........ 3-45 Subtest 4 ........3-45 Port Select menu Subtest 5 ................3-46 Subtest 7 Acceleration sensor ........... 3-50 Subtest 8 Docker Dock/Undock ..........3-52 Subtest 9 Fan control ..............3-52 Subtest A E2PROM (MAC/GUID) ..........
Page 124 3 Tests and Diagnostics 3.289.2 Modem test ..................3-83 3.28.3 Bluetooth test..................3-84 3.28.4 IEEE1394 test..................3-86 3.29 Sound Test program....................3-87 3.30 3G Test program ...................... 3-87 3.31 BIOS SETUP ......................3-88 3. 31.1 Function Description ................3-88 3. 31.2 Accessing the BIOS SETUP Program ..........
Page 125 3 Tests and Diagnostics Tables Table 3-1 Subtest names ....................3-13 Table 3-2 Error codes and error status names ..............3-36 Table 3-3 Hard disk controller status register contents............3-39 Table 3-4 Error register contents..................3-40 3-vi [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 126 3 Tests and Diagnostics PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 3-vii...
Page 127: The Diagnostic Test
3 Tests and Diagnostics Rev B Repair test program This chapter explains how to use the Repair test programs to test the functions of the computer’s hardware modules. The Repair test programs are stored on some Diagnostic Disks. There are Service Program Modules (DIAGNOSTIC MENU) and the Test Program Modules (The Repair test program) on the Diagnostic Disk.
Page 128 A USB test module (USB test ) A USB cable (USB test) An external CRT monitor (Expansion test) A CD test media TOSHIBA CD-ROM TEST DISK or ABEX TEST CD-ROM (Sound test) A DVD test media (DVD-ROM TEST DISK TSD-1) (Sound test)
Page 129 3 Tests and Diagnostics A microphone (Sound test) Headphones (Sound test) A cleaning kit to clean the floppy disk drive heads (Head Cleaning) An exclusive modem test jig (Nitto Electric Manufacture Co.,Ltd-made QE2000P01) (Modem test) A module cable and RJ11 connector checker (Modem test) A LAN wraparound connector (LAN test) PC card wraparound connector (Expansion test) A display with monitor ID function (Expansion test)
Page 130: H/W (Hardware) Initial Information Setting Tool
3 Tests and Diagnostics Rev B 3.1.2 H/W (Hardware) initial information setting tool The H/W initial information setting tool consists of the following programs. Eentry of the DMI infomation DMI information save DMI information recovery You will need the following equipment to perform some of the programs. Repair test program Disk (Main T&D) 3.1.3 Heatrun test program The heatrun test starts automatically after the selection.
Page 131 3 Tests and Diagnostics Rev B Executing the Repair test program To start the Repair test program, follow these steps: 1. Insert the Repair test program disk in the USB floppy disk drive or Optical disk drive. 2. Turn on the computer while pressing U key. The following menu appears. The following menu is an example when Repair test program is performed from NOTE: the floppy disk.
Page 132: Diagnostics Menu (T&D)
Enter in the startup menu, press Repair Main Enter. The following menu appears. TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTICS MENU : 1 - DIAGNOSTIC TEST 2 – ONLY ONE TEST 4 - HEAD CLEANING...
Page 133 Set the highlight bar to 1, and press Enter. The following DIAGNOSTIC TEST MENU will appear: TOSHIBA personal computer XXXXXX DIAGNOSTICS version X.XX (c) copyright TOSHIBA Corp. 20XX DIAGNOSTIC TEST MENU : 1 - SYSTEM TEST 2 - MEMORY TEST...
Page 134 3 Tests and Diagnostics Select the option you want to execute and press Enter. When you select 1- SYSTEM TEST, the following message will appear: SYSTEM TEST NAME XXXXXX xxxxxxx DIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end [Ctrl]+[C] : key stop SUB-TEST : XX PASS COUNT : XXXXX...
Page 135: H/W Initial Information Setting Tool
3 Tests and Diagnostics Rev B Selecting YES of ERROR STOP stops the test program when an error is found and displays the operation guide on the right side of the display screen as shown below: ERROR STATUS NAME [[ HALT OPERATION ]] 1: Test end 2: Continue 3: Retry...
Page 136: Setting Of The Hardware Configuration
3 Tests and Diagnostics Rev B Setting of the hardware configuration To execute this program, 1, Repair Initial config set and press Enter in the startup menu, press Enter and follow the directions on the screen. The H/W initial information setting tool consists of three subtests.
Page 137 3 Tests and Diagnostics Rev B 7. “Create DMIINFO TXT (Y/N) ?” is displayed. Press Y, then the DMI information (text data) is written to the Floppy disk, etc. Setting of the HWSC • Setting of the UUID • Display of the DMI information (including UUID) •...
Page 138: Heatrun Test
3 Tests and Diagnostics Rev B Heatrun Test To execute this program, press 2, Repair Heatrun and press Enter in the startup menu, press Enter. After selecting this test, the same subtests as 3.23 Running Test are executed successively. For more details on the procedure and test content, refer to Running Test. When the heatrun test ends normally, following message appears in the display.
Page 139: Subtest Names
3 Tests and Diagnostics Subtest Names Table 3-1 lists the subtest names for each test program in the DIAGNOSTIC TEST MENU. Table 3-1 Subtest names (1/2) Test Name Subtest No. Subtest Name SYSTEM ROM checksum Fan ON/OFF Geyserville Quick charge DMI read Conventional memory MEMORY...
Page 140 3 Tests and Diagnostics Table 3-1 Subtest names (2/2) Test Name Subtest No. Subtest Name PRINTER Ripple pattern It is not Function Wraparound supported FIR/SIR Point to point (send) ASYNC FIR/SIR Point to point (receive) Wraparound (board) HARD DISK Sequential read Address uniqueness Random address/data Cross talk &...
Page 141: System Test
3 Tests and Diagnostics System Test To execute the System Test, select 1 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 ROM checksum This subtest executes a checksum test of the BIOS ROM (range: F0000h to...
Page 142 3 Tests and Diagnostics Subtest 04 Quick charge This subtest checks the status for the quick charge. Subtest 05 DMI read This subtest displays the information in the Flash-ROM in the following format. *** DMI Data Display Ver X.XX *** Model Name : XXXXXXXXXXX Version Number...
Page 143: Memory Test
3 Tests and Diagnostics Memory Test To execute the Memory Test, select 2 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 Conventional memory This subtest writes a constant data to conventional memory (0 to 640 KB),...
Page 144: Keyboard Test
3 Tests and Diagnostics Keyboard Test To execute the Keyboard Test, select 3 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 Pressed key code display When a key is pressed, the scan code, character code, and key top name are...
Page 145: Display Test
3 Tests and Diagnostics Display Test To execute the Display Test, select 4 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter. Subtest 01 VRAM read/write for VGA This subtest writes the constant data (AAh and 55h) to the video RAM.
Page 146 3 Tests and Diagnostics Subtest 04 Gradation & Mode test for VGA This subtest displays gradations for following modes. To change the mode, press Enter. [Mode 12] [Mode 13] [Mode 3] [Mode 111 640*480 64K] [Mode 112 640*480 16M] [Mode 114 800*600 64K] [Mode 115 800*600 16M]...
Page 147 3 Tests and Diagnostics Subtest 06 “H” pattern display This subtest displays a full screen of “H” patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH To exit this subtest and return to the DISPLAY TEST menu, press Enter. NOTE: The last row may not be completely filled.
Page 148: Floppy Disk Test
3 Tests and Diagnostics 3.10 Floppy Disk Test CAUTION: Before running the floppy disk test, prepare a formatted work disk. Remove the Diagnostics Disk and insert the work disk into the FDD because the contents of the floppy disk will be erased. To execute the Floppy Disk Test, select 5 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen.
Page 149 3 Tests and Diagnostics Select the number of the subtest you want to execute and press Enter. The following message will appear during the floppy disk test. xxx DIAGNOSTIC TEST VX.XX FLOPPY DISK IN PROGRESS XXXXXXX [Ctrl]+[Break] : test end [Ctrl]+[C] key stop SUB-TEST...
Page 150: Printer Test
3 Tests and Diagnostics 3.11 Printer Test NOTE: Printer Test is not supported for this model. To execute the Printer Test, select 6 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. NOTE: An IBM compatible printer must be connected to the system to execute this test. Also, printer port wraparound connector must be connected.
Page 151 3 Tests and Diagnostics Subtest 02 Function This subtest is for IBM compatible printers, and tests the following functions: Normal print Double-width print Compressed print Emphasized print Double-strike print All characters print This subtest prints the various print types shown below: Subtest 03 Wraparound NOTE: To execute this subtest, a printer wraparound connector must be connected to the...
Page 152: Async Test
3 Tests and Diagnostics 3.12 Async Test NOTE: Async Test is not supported for this model. To execute the Async Test, select 7 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions displayed on the screen. Move the highlight bar to the subtest you want to execute and press Enter.
Page 153: Hard Disk Test
3 Tests and Diagnostics 3.13 Hard Disk Test To execute the Hard Disk Test, select 8 from the DIAGNOSTIC TEST MENU, press Enter, and follow the directions on the screen. CAUTION: The contents of the hard disk will be erased when subtest 02, 03, 04, 06, 08 or 09 is executed.
Page 154 3 Tests and Diagnostics 3. The Hard Disk Test message will appear after you respond to the Detail Status prompt. Select the number of the subtest you want to execute and press Enter. The following message will appear during each subtest. XXX DIAGNOSTIC TEST VX.XX HARD DISK TEST XXXXXXX [Ctrl]+[Break] :...
Page 155 3 Tests and Diagnostics Subtest 04 Cross talk & peak shift This subtest writes eight types of worst pattern data (listed below) to a cylinder and then reads the data while moving from cylinder to cylinder. (Tests the data interference in the neighbor track.) Worst pattern data Cylinder ‘B5ADAD’...
Page 156: Real Timer Test
3 Tests and Diagnostics 3.14 Real Timer Test To execute the Real Timer Test, select 9 from the DIAGNOSTIC TEST MENU, press Enter and follow the directions on the screen. Move the highlight bar to the subtest you want to execute and press Enter.
Page 157 3 Tests and Diagnostics Subtest 03 Real time carry CAUTION: When this subtest is executed, the current date and time are erased. This subtest checks the real time clock increments, making sure the date and time are displayed in the following format: Current date : 12-31-1999 Current time : 23:59:58 The real time increments are automatically executed and the following is...
Page 158: Ndp Test
3 Tests and Diagnostics 3.15 NDP Test To execute the NDP test, select 10 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 This test checks the following functions of NDP: Control word Status word Addition Multiplication...
Page 159: Expansion Test
3 Tests and Diagnostics 3.16 Expansion Test To execute the expansion test, select 11 from the DIAGNOSTICS TEST MENU, press Enter and follow the directions on the screen. Subtest 01 PCMCIA wrap around [It is not supported ] CAUTION: PCMCIA wraparound test is not supported for this model. NOTE: To execute this subtest, the PC card wraparound connector is required.
Page 160 3 Tests and Diagnostics Subtest 02 RGB monitor ID NOTE: To execute this subtest, an external monitor with monitor ID function is required. Connect the external monitor to the PC for the test of ID acquisition. The judgment of acquisition is based on the panel data. In simultaneous display mode or internal display mode, in which the panel data is acquired, this subtest will fail.
Page 161: Cd-Rom/Dvd-Rom Test
3.17 CD-ROM/DVD-ROM Test NOTE: CD-ROM/DVD-ROM Test is not supported for this model. NOTE: For the subtest 01, 02 and 03, use the TOSHIBA CD-ROM TEST DISK TDY-01 or ABEX TEST CD-ROM TCDR-702 and DVD-ROM TEST DISK TSD-1. For the subtest 04, use a CD-RW on the market.
Page 162: Error Code And Error Status Names
3 Tests and Diagnostics 3.18 Error Code and Error Status Names Table 3-2 lists the error codes and error status names for the DIAGNOSTIC TEST. Table 3-2 Error codes and error status names (1/3) Device name Error code Error status name (Common) Data Compare Error ROM - CHECKSUM ERROR...
Page 163 3 Tests and Diagnostics Table 3-2 Error codes and error status names (2/3) Device name Error code Error status name FDD - BAD COMMAND ERROR FDD - ADDRESS MARK NOT FOUND FDD - WRITE PROTECTED FDD - RECORD NOT FOUND FDD - DMA OVERRUN ERROR FDD - DMA BOUNDARY ERROR FDD - CRC ERROR...
Page 164 3 Tests and Diagnostics Table 3-2 Error codes and error status names (3/3) Device name Error code Error status name (HDD) HDD - WRITE FAULT HDD - STATUS ERROR HDD - BAD SECTOR HDD - ACCESS TIME ERROR HDD - NO HDD HDD - DMA CRC ERROR NDP - NO CO-PROCESSOR NDP - CONTROL WORD ERROR...
Page 165: Hard Disk Test Detail Status
3 Tests and Diagnostics 3.19 Hard Disk Test Detail Status When an error occurs in the hard disk test, the following message is displayed: HDC status = XXXXXXXX Detailed information about the hard disk test error is displayed on the screen by an eight-digit number.
Page 166 3 Tests and Diagnostics Table 3-4 Error register contents Name Description “0” … Not used. (Bad block mark) “1” … A bad block mark is detected. “0” … There is no uncorrectable data error. (Uncorrectable) “1” … Uncorrectable data error has been detected. ——...
Page 167: Only One Test
3 Tests and Diagnostics Rev D 3.20 ONLY ONE TEST 3.20.1 Program Description This program tests the unique functions of this model. 3.20.2 Operations Select test 2 from the DIAGNOSTIC MENU and press Enter. The following menu appears in the display. PORTÉGÉ...
Page 168 3 Tests and Diagnostics Rev D PORTÉGÉ M750 ################################################################# ######## ONLY ONE TEST Menu (XXXXXXXXX) ######## ################################################################# 1 .... Pressed Key Display 2 .... Touch Pad 3 .... Wireless communication switch 4 .... USB Port Select menu 5 .... 6 .... Button 7 ....
Page 169: Subtest 1
3 Tests and Diagnostics Subtest 1 Pressed key display When you execute this subtest, the keyboard layout is drawn on the display as shown below. When any key is pressed, the corresponding key on the screen changes to the key character that was pressed. Holding a key down enables the auto-repeat function that causes the key’s display character to blink.
Page 170: Subtest 2
3 Tests and Diagnostics Subtest 2 Touch Pad This subtest checks the functions of the touch pad as shown below. A) Direction and parameter B) Switching function check. This test displays the response from the touch pad and touch pad switch. When moving your finger on the touch pad towards the upper left, the <...
Page 171: Subtest 3
3 Tests and Diagnostics Subtest 3 Wireless communication switch This subtest checks if the Wireless communication switch works properly. If the test is started with the switch ON, following message appears in the display. Wireless communication switch is set to a start position (OFF) Slide the switch to OFF position.
Page 172: Subtest 5 Led
3 Tests and Diagnostics Subtest 5 This subtest checks if each LED lights properly. The following message appears in the display in order. Follow the instructions in the display to execute the test. [HDD Access LED test] Press any key and following message appears in the display. [Caps/Num/Overlay BT/W-LAN LED test] Press [Caps Lock ] key ! ...Caps (on/off)
Page 173 3 Tests and Diagnostics Subtest 6 Button This subtest checks if the buttons in the following figure work properly. The following message appears in the display. Presses in the direction of 4 corner and the center X 1 2 3 4 5 * * * * * Press Function button! PORTEGE M700/M750 Maintenance Manual (960-661)
Page 174 Press any key return to each Steps if NG! or Press any key message apprears. Step 4 Press TOSHIBA Presentation button. OK message appears in the display if the test ends without an error. Press any key return to each Steps if NG! or Press any key message apprears...
Page 175 3 Tests and Diagnostics The following message appears in the display. < ------ Volume Down -------- > Volume Up! Step5 Volume dial is turned to the left. OK message appears in the display if the test ends without an error. Press any key return to each Steps if NG! or Press any key message apprears <...
Page 176: Subtest 7 Acceleration Sensor
3 Tests and Diagnostics Subtest 7 Acceleration sensor This subtest detects and corrects the each axis (X, Y, Z). NOTE: Make sure that this subtest is executed on the following condition: 1. Flat desk with vertical plane to get the stability of machine. 2.
Page 177 3 Tests and Diagnostics When this subtest is selected, the following message appears in the display. The heaven surface establishes in the upper direction Press [Enter] key NOTE: Be sure to execute the test with the display panel opened. Set the machine on the flat desk. Then press Enter to detect the data on this setting of machine.
Page 178: Subtest 8 Docker Dock/Undock
3 Tests and Diagnostics Rev B Subtest 8 Docker Dock/Undock This subtest is executed with an Slim Port Replicator II. installed. Press Enter while pushing the eject button of the Slim Port Replicator II. the following message appears. Pushing Eject-SW, and press [Enter] Key Press Enter without pushing the eject button of the Slim Port Replicator II.
Page 179: Subtest B Intel Amt
3 Tests and Diagnostics Rev C Subtest B Intel AMT It checks whether the Intel AMT corde versions information are written. is required for an AMT check. Intel Kedron Intel BIOS should be AMT correspondence. Intel Subtest C Degitizer utility NOTE: 1.
Page 180: Subtest D
3 Tests and Diagnostics Rev D Then the test returns to the ONLY ONE TEST menu automatically after a while. Don't turn off the power by any means until the ONLY ONE TEST menu appears again. The following error message is displayed when the digitizer is out of order. “Press any key!”...
Page 181 3 Tests and Diagnostics Rev D Return : Get ATR failed! If it is NG, the following message will come out. 02SCR Initial failed!!! SD Card (R5C847 Writh/Read) (PORTÉGÉ M750 only) The functional check of SD Card. Enter the E key and insert an SD card. Pressing any key will start the test.
Page 182: Head Cleaning
3 Tests and Diagnostics 3.21 Head Cleaning 3.21.1 Function Description This function cleans the heads in the FDD by executing a series of head load/seek and read operations. A cleaning kit is necessary to perform this program. 3.21.2 Operations 1. Selecting test 4 from the DIAGNOSTIC MENU and pressing Enter displays the following messages: DIAGNOSTICS - FLOPPY DISK HEAD CLEANING : VX.XX Mount cleaning disk(s) on drive(s).
Page 183: Log Utilities
3 Tests and Diagnostics 3.22 Log Utilities 3.22.1 Function Description This function logs error information generated while a test is in progress and stores the results in RAM. This function can store data on a floppy disk, or output the data to a printer or the display.
Page 184: Operations
3 Tests and Diagnostics 3.22.2 Operations 1. Select 5 and press Enter in the DIAGNOSTIC MENU, the error information is displayed in the following format: XXXXX ERRORS TS-NO PASS STS ADDR WD RD HSTS [ERROR STATUS NAME] FDD 02 0000 103 00001 00 00 0000 FDD-WRITE PROTECTED FDD 01 0000 180...
Page 185: Running Test
3 Tests and Diagnostics 3.23 Running Test 3.23.1 Function Description This function automatically executes the following tests in sequence: 1. System test (subtest 01) 2. Memory test (subtests 01, 02) 3. Display test (subtest 01) 4. Real timer test (subtest 02) 5.
Page 186: Floppy Disk Drive Utilities
1. FORMAT NOTE: This program is only for testing a floppy disk drive. It is different from the Toshiba DOS FORMAT command. This program can format a floppy disk in the following formats: (a) 2DD: Double-sided, double-density, double-track, 96/135 TPI, MFM mode, 512 bytes, 9 sectors/track.
Page 187: Operations
3 Tests and Diagnostics 3.24.2 Operations 1. Selecting 7 from the DIAGNOSTIC MENU and pressing Enter displays the following message. [ FDD UTILITIES ] 1 - FORMAT 2 - COPY 3 - DUMP 4 – HDD-ID READ 9 - EXIT TO DIAGNOSTICS MENU 2.
Page 188 3 Tests and Diagnostics 3. COPY program (a) When COPY is selected, the following message appears. FLOPPY DISK FORMAT & COPY : VX.XX Type select (0:2DD,3:2HD) ? (b) Selecting a media/drive type number will display a message similar to the one below.
Page 189 3 Tests and Diagnostics 4. DUMP program (a) When DUMP is selected, the following message appears. DIAGNOSTICS-HARD DISK & FLOPPY DISK DUMP : VX.XX Drive type select (1:FDD, 2:HDD) ? (b) Select a drive type. If is selected, the display will go to step (h). If 2:HDD is selected, the following message will appear.
Page 190 3 Tests and Diagnostics (k) The following message will appear. To finish the dump, select 3. Press number key (1:up,2:down,3:end) ? (l) The following message will appear. Selecting 2 returns to the FDD UTILITIES MENU. Another dump (1:Yes,2:No) ? 5. HDD ID READ program Selecting HDD ID displays the following HDD ID configuration.
Page 191: System Configuration
3 Tests and Diagnostics 3.25 System Configuration 3.25.1 Function Description NOTE: To display the system configuration, the write protect tab should be OFF position. If the tab is ON position, move the tab to OFF position and restart the test. Otherwise the correct information cannot be acquired. The System Configuration program contains the following configuration information for the computer: 1.
Page 192: Operations
3 Tests and Diagnostics 3.25.2 Operations Select 8 from the DIAGNOSTIC MENU and press Enter. Then, the following system configuration appears in the display. System Configuration Display : Ver X.XX [Machine Name ???] - Processor Type = XXXXXX-XXXXXMHz Code = XX L2 Cache = XXXXXKB - Chip set = XXXXXX...
Page 193: Wireless Lan Test Program (Intel-Made B/G, A/B/G Setting Up Of Ref Pc)
3 Tests and Diagnostics 3.26 Wireless LAN Test Program (Intel-made b/g, a/b/g Setting up of REF PC) For the test of Intel-made wireless LAN cards, configure the test environment as shown below with the following equipment. which can operate on Windows XP and is corresponding to access point 11a, 11b and 11g NOTE: Set the SSID of AP as follows.
Page 194 3 Tests and Diagnostics 2. Open “My Computer” window and click “My Network places” on the left column. 3. Click “View network connections” on the left column. 4. The “Network Connections” window appears. Double-click “Local Area Connection”. Network Connections window 3-68 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 195 3 Tests and Diagnostics 5. Click “Install…” button on the “Local Area Connection Properties” window. Local Area Connection Properties window 6. Select “Protocol” on the “Select Network Component Type” window and click “Add…” button. Select Network Component Type window 7. Click “Have Disk…” button on the “Select Network Protocol” window. Select Network Protocol window PORTEGE M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 196 3 Tests and Diagnostics 8. When “Install From Disk” window appears, click “Browse…” and specify the created “Clx_Res” folder. Then Click “OK”. (For the test, “PACKET.INF” file is used.) Install From Disk window 9. The “Select Network Protocol” window appears again. In the “Network Protocol”, “DDK PACKET Protocol”...
Page 197 3 Tests and Diagnostics After the completion of REF PC setup, restart the WINDOWS. Then perform the Responder test program for Windows (WTWINSVR.EXE) in the Clx_Res folder. WTWINSVR.EXE Function : Transmitting/receiving of data to/from DUT via AP OS available : Windows XP only How to start : Double-click WTWINSVR icon.
Page 198: Wireless Lan Test Program On Dut Pc(Intel-Made )
3 Tests and Diagnostics 3.27 Wireless LAN Test Program on DUT PC (Intel-made) 3.27.1 Wireless LAN Test Program (Intel-made : Golan) on DUT PC This section describes how to perform the wireless LAN transmitting-receiving test (Intel- made 802.11 b/g or 802.11 a/b/g Golan). To execute the wireless LAN test, use the Diagnostics disk for wireless LAN test.
Page 199 3 Tests and Diagnostics Press any key and return to the test menu. If a defective is found during the test, NG message will appear in the display. Press any key and return to the test menu. When a defective is detected in the test, following typical cause is considered. •...
Page 200 3 Tests and Diagnostics Subtest03 Antenna check & communication test of 11b mode This subtest execute transmitting/receiving test in 802.11b mode using the main antenna first. If a defective is not found during the test, transmitting/receiving test in 802.11b mode using the AUX antenna is automatically executed.
Page 201 3 Tests and Diagnostics Subtest05 Communication test of 11g mode This subtest execute transmitting/receiving test in 802.11g mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If a defective is found during the test, NG message will appear in the display.
Page 202: Wireless Lan Test Program(Intel-Made:kedron) On Dut Pc
3 Tests and Diagnostics 3.27.2 Wireless LAN Test Program (Intel-made:Kedron) on DUT PC This section describes how to perform the wireless LAN transmitting-receiving test (Intel- made 802.11 a/b/g or 802.11 a/b/g/n: kedron). To execute the wireless LAN test, use the Diagnostics disk for wireless LAN test.
Page 203 3 Tests and Diagnostics Press any key and return to the test menu. When a defective is detected in the test, following typical cause is considered. • Connection of wireless LAN card • Using a wrong wireless LAN card (Using unspecified card) •...
Page 204 3 Tests and Diagnostics This subtest execute transmitting/receiving test in 802.11a mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If a defective is found during the test, NG message will appear in the display.
Page 205 3 Tests and Diagnostics Subtest05 Communication test of 11g mode This subtest execute transmitting/receiving test in 802.11g mode using the main antenna. If a defective is not found during the test, OK message will appear in the display. Press any key and return to the test menu. If a defective is found during the test, NG message will appear in the display.
Page 206: Lan/Modem/Bluetooth/Ieee1394 Test Program
3 Tests and Diagnostics 3.28 LAN/Modem/Bluetooth/IEEE1394 Test Program This section describes how to perform the LAN/Modem/Bluetooth/IEEE1394 test with the test program. Insert the test program disk for LAN/Modem/Bluetooth/IEEE1394 test in FDD and turn on the power. The following message will appear: Microsoft Windows XX Startup Menu ---------------------------------- Modem...
Page 207 3 Tests and Diagnostics Subtest01 (i82562 + ICHx) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. The following message will appear: [LAN transmit & receive test !] COMPLETED Repeat count = 00000 Error count 00000 LOOPBACK TEST 100Mbps Auto-negotiation TxRx Test...
Page 208 3 Tests and Diagnostics Subtest02 (GbE) This subtest checks the operation of mini-PCI I/F by the loopback test in the chip. Select 2 to execute and press Enter. The following message will appear: Testing adaptor...hit <ESC> to abort. External Loopback Test...PASSED Testing completed.
Page 209: Modem Test
3 Tests and Diagnostics 3.28.2 Modem test NOTE: Modem Test is not supported for this model. For this subtest, connect the modem PCB and RJ11 connector with a harness. Use the dedicated “FAT-MODE inspection device (product code: QE2000P01 made by Nitto Denki Seisakusyo)”...
Page 210: Bluetooth Test
(A mobile phone with the Bluetooth function is also available.) A Bluetooth card should be installed on the target computer. Install the Bluetooth function by clicking [All Programs] -> [TOSHIBA] -> [Bluetooth] -> [Bluetooth Settings]. Test procedure 1.
Page 211 3 Tests and Diagnostics Select “Diagnostics” tab and click “Run”. 6. Check the “Log” to confirm the test result. BT address of test computer BT address of responder device 7. When the BT (Bluetooth) address of the responder device appears, the Bluetooth card and antenna connection are OK.
Page 212: Ieee1394 Test
3 Tests and Diagnostics 3.28.4 IEEE1394 test To execute this test, press 4 and Enter. NOTE: Use another computer that can communicate by IEEE1394 (i. Link) cable as a reference machine to perform this test. The following menu will appear: ******************************************************************** ******** IEEE1394[XXXXX] Diagnostics program...
Page 213: Sound Test Program
Sound TEST disk cannot be used in PORTEGE M700. Therefore, please test the sound on Windows OS. 1) Play a music file. 2) click TOSHIBA-> utility -> "PC diagnostic tool." to test the sound Please check operation of speakers by one of methods. 3.31 3G Test program Therefore, please test the sound on Windows OS.
Page 214: Bios Setup
Tests and Diagnostics 3.32 BIOS SETUP 3.32.1 Function Description This program displays the current system setup information as listed below: 1. Memory 2. System Date/Time 3. Password (a) User Password (b) Supervisor Password 4. HDD Password (a) HDD (b) HDD Password Mode (c) User Password (d) Master Password 5.
Page 215 Tests and Diagnostics (b) SATA Controller Mode 10. PCI Bus 11. Display (a) Power On Display 12. Peripheral (a) Internal Pointing Device 13. Legacy Emulation (a) USB KB/Mouse Legacy Emulation (b) USB-FDD Legacy Emulation (c) USB Memory BIOS Support 14. PCI LAN (a) Built-in LAN 15.
Page 216 Tests and Diagnostics 3.32.2 Accessing the SETUP Program While pressing ESC, turn on the power. Then press F1. The following display appears. 3-90 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 217 Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] 3-91...
Page 218 Tests and Diagnostics Moving Within the SETUP Menu and Changing Values to move between the two columns. Press ↑ and ↓ to move between 1. Press items in a column. Press PGUP and PGDN to move between the two pages. 2.
Page 219 Tests and Diagnostics SETUP Options The SETUP screen is divided into 14 functionally related groups. This section describes each group and its options. 1. Memory This group of options displays the computer’s memory. This field displays the total amount of memory installed and is automatically calculated by the computer.
Page 220 Tests and Diagnostics (b) HDD Password Mode This item registers HDD password and can be selected only for registering HDD password. To change HDD Password Mode when HDD password is registered, delete the registered HDD password first, and then register new password.
Page 221 Tests and Diagnostics (b) HDD Priority This option enables to select the priority for the Built-in HDD, Second HDD or USB. Built-in HDD→ Second HDD→ USB (Default) Second HDD→ Built-in HDD→ USB USB →Built-in HDD→ Second HDD USB → Second HDD→Built-in HDD 6.
Page 222 Tests and Diagnostics This option set the Execute-Disable Bit function of CPU to the operation system. Execute-Disable Bit gives higher security function preventing the PC from the computer viruses and buffer overflow problem on unauthorized access. Available Enable the Execute-Disable Bit function. Not Available Disable the Execute-Disable Bit function.
Page 223 Tests and Diagnostics On Battery The following settings can be changed when the Wake-up on LAN is Enabled. Enabled Wake-up on LAN function whenoperating from the battery. Disabled Wake-up on LAN function whenoperating from the battery (Default). NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you use this feature.
Page 224 Tests and Diagnostics 7. Configuration (a) Device config. This option lets you set the device configuration. All Devices BIOS sets all devices. Setup by OS Initializes devices, which is needed to load an operating system. Operating system initializes other devices. (Default) NOTE: 1.
Page 225 Tests and Diagnostics Battery Save Options Processing Speed This feature changes the CPU processing speed. High CPU operates at high speed. (Default in Full Power Mode) CPU operates at low speed. (Default in Low Power Mode) CPU Sleep Mode Use this option to enable or disable the CPU sleep function. Enabled Enables sleep mode.
Page 226 Tests and Diagnostics Auto PCI Express devices are not used while battery operation. (Default) Disabled Disable the Power-saving function and drive with maximum performance. Enabled PCI Express devices are not used. (c) Enhanced C-States This option set the power-saving function of Enhanced C-States on the following conditions.
Page 227 Tests and Diagnostics 10. PCI Bus This option displays the interrupt level for the Card Bus in the computer. It is for information only and cannot be changed. PCI BUS = Serial IRQ10, IRQ11 11. Display This group of options configures the computer’s display. (a) Power On Display This option is used to select the display when booting up.
Page 228 Tests and Diagnostics (b) USB-FDD Legacy Emulation This option sets the Legacy support condition of the USB floppy disk drive. When a computer is FDD built-in model, this option is not displayed. Enabled Enables support. (Default) LEGACY USB floppy disk is available without the driver. Disabled Disables LEGACY support (c) USB Memory BIOS Support...
Page 229 Tests and Diagnostics PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] 3-103...
Page 230: Replacement Procedures
Chapter 4 Replacement Procedures [CONFIDENTIAL]...
Page 231 4. Replacement Procedures 4-ii [CONFIDENTIAL] PORTÉGÉ M700/M750 Maintenance Manual (960-661)
Page 232 4. Replacement Procedures Chapter 4 Contents Overview........................4-1 Battery pack ......................4-10 PC card/Smart card/Bridge media ................4-12 4.3.1 PC card..................... 4-12 4.3.2 Smart card ....................4-13 4.3.3 Bridge media.................... 4-14 Tablet PC pen......................4-15 Reserve pen case ..................... 4-16 HDD........................
Page 233 4. Replacement Procedures 4.28 Sensor board......................4-74 4.29 Touch pad........................ 4-75 4.30 Speaker........................4-79 4.31 Hinge assembly....................... 4-81 4.32 LCD unit/Touch panel/Digitizer ................4-85 4.33 Switch board/Fingerprint sensor board..............4-106 4.34 Web camera board ....................4-108 4.35 Wireless antenna/Internal microphone/Web camera cable........4-109 4-iv [CONFIDENTIAL] PORTÉGÉ...
Page 234: Figure
4. Replacement Procedures Figures Figure 4-1 Removing the battery pack................4-10 Figure 4-2 Removing the PC card ..................4-12 Figure 4-3 Removing the Smart card................. 4-13 Figure 4-4 Removing the Bridge media................4-14 Figure 4-5 Removing the tablet PC pen................4-15 Figure 4-6 Removing the reserve pen case ................
Page 235: Figure
4. Replacement Procedures Figure 4-31 Removing the front panel................4-54 Figure 4-32 Removing the heat sink (with fan) ..............4-56 Figure 4-33 Removing the fan ................... 4-57 Figure 4-34 Removing the CPU ..................4-58 Figure 4-35 Installing the CPU ..................4-59 Figure 4-36 Applying silicon grease..................
Page 236 4. Replacement Procedures PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-vii...
Page 237: Overview
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B Replacement Procedures Overview This chapter describes the procedure for removing and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the FRUs in order to replace one. The chart below provides a guide as to which other FRUs must be removed before a particular FRU can be removed.
Page 238 Please read the following safety instructions before disassembling the computer and always follow the instructions while working on the computer. DANGER: 1) Always use the genuine battery that is authorized by Toshiba or compatible with the unit. Since other battery packs have different specifications, they may be incompatible with the unit, and may burst or explode.
Page 239 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Before You Begin Take note of the following points before starting work. Always remove the AC adapter and battery pack before commencing any of the procedures. The procedure for removing the battery pack is described in section “4.2.
Page 240 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Disassembly Procedure Four main types of cable connector are used. • Pressure plate connector • Spring connector • Back flip connector • Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cable out from the connector.
Page 241 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Assembly Procedure After the computer has been disassembled and the part that caused the fault has been repaired or replaced, the computer must be reassembled. Take note of the following general points when assembling the computer.
Page 242 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B NOTE: When assembling the computer, follow the gap standard in the figure below. COVER - FACE SHEET COVER - T-PAD BUTTON COVER - T- PAD BUTTON LCD COVER - LCD TOP COVER ODD - BASE ODD - BASE...
Page 243: Tools And Equipment
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B Mark Gap standard Mark Gap standard Mark Gap standard LCD COVER – LCD TOP COVER LCD COVER – LCD TOP COVER BASE – FRONT COVER (Around) BASE –...
Page 244 CAUTION: Overtightening can damage components and screws; undertightening can result in electrical shorts or other damage if screws or components come loose. NOTE: Toshiba recommends that you use an electric screwdriver for quick and easy operations. • 0.167 N•m (1.7 kgf •cm) M2 (2mm) •...
Page 245 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Grip Color Some screws have a colored grip area to help you determine the length of the screw. • Even numbered length screws: Brown •...
Page 246: Battery Pack
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Battery pack Removing the battery pack The following describes the procedure for removing the battery pack. (See Figure 4-1.) CAUTION: Take care not to short circuit the terminals when removing the battery pack. Similarly, do not drop, knock, scratch, disassemble, twist, or bend the battery pack.
Page 247 Dispose always the used batteries pack in accordance with the laws and ordinances of your local authority. Use only the batteries approved by Toshiba. NOTE: Check visually the battery terminals and clean off any dirt with a dry cloth.
Page 248: Pc Card/Smart Card/Bridge Media
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. PC card/Smart card/Bridge media 4.3.1 PC card Removing the PC card The following describes the procedure for removing the PC card. (See Figure 4-2.) CAUTION: Insert or remove the PC card in accordance with any instructions in the PC card manual or the manuals of the computer system you are using.
Page 249: Smart Card
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3.2 Smart card Removing the Smart card The following describes the procedure for removing the Smart card. (See Figure 4-3.) CAUTION: Insert or remove the Smart card in accordance with any instructions in the Smart card manual or the manuals of the computer system you are using.
Page 250: Bridge Media
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.3.3 Bridge media Removing the Bridge media (SD Card/Memory Stick/xD Picture Card/ MultiMediaCard) The following describes the procedure for removing the Bridge media. (See Figure 4-4.) CAUTION: Insert or remove the Bridge media in accordance with any instructions in the Bridge media manual or the manuals of the computer system you are using.
Page 251: Tablet Pc Pen
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Tablet PC pen Removing the Tablet PC pen The following describes the procedure for removing the tablet PC pen. (See Figure 4-5.) 1. Push the tablet PC pen in the tablet PC pen slot, so that it protrudes slightly. 2.
Page 252: Reserve Pen Case
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Reserve pen case Removing the Reserve pen case The following describes the procedure for removing the reserve pen case. (See Figure 4-6.) 1. Close the display and turn over the computer 2.
Page 253: Hdd
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Removing the HDD The following describes the procedure for removing the HDD. (See Figure 4-7 to 4-9.) CAUTION: Take care not to press on the top and bottom of the HDD. Pressure may cause data loss or damage to the device.
Page 254 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Hold the tab to raise the HDD assembly straight and pull out the HDD assembly from the connector of the HDD cable. NOTE: When removing the HDD assembly, be careful not to tear the tab. If the tab is torn, replace the HDD holder with a new one.
Page 255 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Place the HDD assembly on a flat surface and remove the following screws fixing the HDD holder. • M3.0×4.0C ×4 FLAT HEAD screw 4.
Page 256 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the HDD The following describes the procedure for installing the HDD. (See Figure 4-7 to 4-9.) CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD.
Page 257: Slim Select Bay Module
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Slim select bay module Removing the slim select bay module The following describes the procedure for removing the slim select bay module. (See Figure 4-10 and 4-11.) The explanation and figure shown below indicate the optical drive removing/installing.
Page 258 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev D PORTÉGÉ M700 only 4. Remove the following screws, connector cover and connector from the optical drive assembly. • M2.0×6.0C ×2 BIND screw 5.
Page 259 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. • M2.0×3.0C ×1 S-THIN HEAD screw Rev D • M2.0×22.0C ×1 BIND screw Connector Connector base M2.0×22.0C BIND M2.0×3.0C S-THIN HEAD M2.0×3.0C S-THIN HEAD ODD side assembly Figure 4-12-SATA Detaching the optical drive assembly(PORTÉGÉ...
Page 260 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Install the connector cover and connector to the optical drive assembly and secure them with the following screws. • M2.0×6.0C ×2 BIND screw 4.
Page 261: Memory Module (Slot B)
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Memory module (slot B) CAUTION: The power must be turned off when you remove the memory module. Removing the memory module with the power on risks damaging the module or the computer itself.
Page 262 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Open the left and right latches and remove the memory module. Latch Latch Memory module Figure 4-14 Removing the memory module (slot B) 4-26 [CONFIDENTIAL] PORTÉGÉ...
Page 263 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the memory module To install the memory module, make sure the computer is in boot mode and powered off. Then perform the following procedure. (See Figure 4-12 and 4-13.) 1.
Page 264: Fan Hood
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fan hood NOTE: When repairing the PC, clean the fan hood and heat sink with a vacuum cleaner and cotton sticks, and remove dusts with tweezers. Removing the Fan hood The following describes the procedure for removing the fan hood.
Page 265 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the Fan hood The following describes the procedure for installing the fan hood. (See Figure 4-14.) 1. Install the fan hood into the slot. 2.
Page 266: Keyboard
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.10 Keyboard Removing the keyboard The following describes the procedure for removing the keyboard. (See Figure 4-15 to 4-18.) 1. Turn the computer face up. 2.
Page 267 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 5. Lift the top edge of the keyboard while releasing latch and turn it face down on the palm rest while releasing the guides from the slits. Guide Keyboa Slit...
Page 268 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 6. Remove the following screw and keyboard cover. • M2.5×3.0C ×1 S-THIN HEAD screw M2.5x3.0C S-THIN HEAD Keyboard cover Figure 4-18 Removing the keyboard cover 7.
Page 269 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the keyboard The following describes the procedure for installing the keyboard. (See Figure 4-15 to 4-18.) 1. Place the keyboard face down on the palm rest. 2.
Page 270: Memory Module (Slot A)
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.11 Memory module (slot A) CAUTION: The power must be turned off when you remove the memory module. Removing the memory module with the power on risks damaging the module or the computer itself.
Page 271 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Open the left and right latches and remove the memory module. Latch Latch Memory module Figure 4-21 Removing the memory module (slot A) PORTÉGÉ...
Page 272 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the memory module To install the memory module, make sure the computer is in boot mode and powered off. Then perform the following procedure. (See Figure 4-19 and 4-20.) 1.
Page 273: Wireless Lan Card/Robson Card
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.12 Wireless LAN card/Robson card Removing the Wireless LAN card/Robson card To remove the wireless LAN card/Robson card, follow the steps below. (See Figure 4-21 to 4-23.) CAUTION: Do not try to remove the wireless LAN card/Robson card with the computer turned on.
Page 274 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 2. Remove the following screws and disconnect the Robson card from the connector on the system board. • M2.0×4.0B ×2 S-THIN HEAD screw M2.0×4.0B S-THIN HEAD Robson card Figure 4-23 Removing the Robson card 4-38...
Page 275 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Disconnect the wireless LAN antenna cables (black, white and gray) from the wireless LAN card using an antenna coaxial cable disconnector. 4. Remove the following screws and disconnect the wireless LAN card from the connector on the system board.
Page 276 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the Wireless LAN card/Robson card To install the wireless LAN card/Robson card, follow the steps below. (See Figure 4-21 to 4- 23.) CAUTION: Be sure to switch the computer off before installing the wireless LAN card. Otherwise, the computer or the wireless LAN card may be damaged.
Page 277: Card (3G Model Only)
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Rev B 4.13 3G card (3G model only) Removing the 3G card To remove the 3G card, follow the steps below. (See Figure 4-3G.) CAUTION: Do not try to remove the 3G card with the computer turned on.
Page 278 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the 3G card To install the 3G card, follow the steps below. (See Figure 4-3G) CAUTION: Be sure to switch the computer off before installing the 3G card. Otherwise, the computer or the3G card may be damaged.
Page 279: Base Assembly And Cover Assembly
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 4.14 Base assembly and Cover assembly Removing the base assembly and cover assembly The following describes the procedure for removing the base assembly and cover assembly. (See Figure 4-24 to 4-26.) 1.
Page 280 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 3. Stand the display 90 degrees. 4. Turn the display clockwise 90 degrees and remove the following screws. • M2.5×10.0B ×2 FLAT HEAD screw 5.
Page 281 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. 6. Return the display counterclockwise in the original position, close the display and turn over the computer. 7. Remove the following screws. • M2.5×16.0B ×3 (“16”...
Page 282 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert. Installing the base assembly and cover assembly The following describes the procedure for installing the base assembly and cover assembly. (See Figure 4-24 and 4-26.) 1.
Page 283: Slim Select Bay Latch
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Replacement Procedures 4.15 Slim select bay latch Removing the Slim select bay latch The following describes the procedure for removing the slim select bay latch. (See Figure 4- 27.) 1. Remove the slim select bay cap on the bottom while pushing two latches inside to release them.
Page 284 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Slim select bay latch The following describes the procedure for installing the slim select bay latch (See Figure 4- 27). 1. Set the spring to the slim select bay latch. 2.
Page 285: Battery Lock Assembly
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.16 Battery lock assembly Removing the Battery lock assembly The following describes the procedure for removing the battery lock assembly. (See Figure 4-28.) 1. Remove the battery lock assembly from the slot while pushing it in the direction in the figure below.
Page 286: Rtc Battery
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.17 RTC battery CAUTION: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the laws and ordinances of your local authority. Removing the RTC battery The following describes the procedure for removing the RTC battery.
Page 287 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the RTC battery The following describes the procedure for installing the RTC battery. (See Figure 4-29.) 1. Connect the RTC battery cable to the connector CN9300 on the system board. 2.
Page 288: Bluetooth Module
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.18 Bluetooth module Removing the Bluetooth module The following describes the procedure for removing the Bluetooth module. (See Figure 4- 30.) CAUTION: Do not try to remove the Bluetooth module with the computer turned on. You can damage the computer or Bluetooth module.
Page 289 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Bluetooth module The following describes the procedure for installing the Bluetooth module. (See Figure 4-30.) 1. Turn up the black sheet. 2. Connect the Bluetooth cable to the connector on the Bluetooth module. 3.
Page 290: Front Panel
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.19 Front panel Removing the Front panel The following describes the procedure for removing the front panel. (See Figure 4-31.) 1. Remove the front panel from the base assembly while lifting the system board up slightly.
Page 291: Fan/Heat Sink/Cpu
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.20 Fan/Heat sink/CPU Removing the Fan/Heat sink/CPU The following describes the procedure for removing the fan/heat sink/CPU. (See Figure 4-32 to 4-34.) 1. Remove the following screws, metal plate and CPU hold plate. •...
Page 292 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich M2.0x4.0B BIND Metal plate Fan hood M2.0x4.0B BIND Fan cable CPU hold plate Heat sink CN8771 M2.0x4.0B BIND Cooling sheet Figure 4-32 Removing the heat sink (with fan) 4-56 [CONFIDENTIAL] PORTÉGÉ...
Page 293 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 6. Set the flat plate under the fan so that stress is not given to the assembly while disassembling and assembling. 7. Remove the following screws and separate the fan and heat sink. •...
Page 294 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 8. Unlock the CPU by rotating counterclockwise the cam on the CPU socket by 90 degrees with a flat-blade driver. Figure 4-34 Removing the CPU 9. Remove the CPU. CAUTION: When removing the CPU, lift it up right above. Otherwise, pins of CPU may be damaged.
Page 295 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Fan/Heat sink/CPU The following describes the procedure for installing the fan/heat sink/CPU. (See Figure 4-32 to 4-36.) 1. Make sure that the cam of the CPU socket is in the unlock (OPEN) position. 2.
Page 296 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4. If there is already silicon grease on the CPU and heat sink, clean it with a cloth. Using a special applicator, apply silicon grease (DENKA GFC-F1) so that the CPU chip on the CPU is completely covered.
Page 297: System Board
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.21 System board Removing the System board The following describes the procedure for removing the system board. (See Figure 4-37 and 4-38.) 1. Turn up the insulator and disconnect the speaker cable and microphone cable from the connector CN6150 and CN6060 on the system board.
Page 298 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 3. Turn up the black sheet and peel off the acetate tape. 4. Lift up the system board and disconnect the sensor cable from the connector CN9530 on the system board. NOTE: Do not try to remove the system board with the sensor cable being connected.
Page 299 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the system board The following describes the procedure for installing the system board. (See Figure 4-37 and 4-38.) 1. Set the system board to the cover assembly. 2. Lift up the system board and connect the sensor cable to the connector CN9530 on the system board.
Page 300 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B 8. Turn up the insulator and connect the speaker cable and microphone cable to the connector CN6150 and CN6060 on the system board. NOTE: When installing a new system board, stick new keyboard supports on the system board according to the model.
Page 301: Hdd Cable/Bluetooth Cable
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.22 HDD cable/Bluetooth cable Removing the HDD cable/Bluetooth cable The following describes the procedure for removing the HDD cable/Bluetooth cable. (See Figure 4-39.) 1. Peel off the insulator and disconnect the HDD cable from the connector CN1900 on the system board.
Page 302: Mdc
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.23 MDC Removing the MDC The following describes the procedure for removing the MDC. (See Figure 4-40.) 1. Remove the following screws securing the MDC. • M2.0×4.0B ×2 BIND screw 2.
Page 303 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the MDC The following describes the procedure for installing the MDC. (See Figure 4-40.) 1. Connect the MDC cable to the connector on the MDC. 2. Connect the MDC to the connector CN3010 on the system board. 3.
Page 304: Pc Card Slot
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B 4.24 PC card slot Removing the PC card slot The following describes the procedure for removing the PC card slot. (See Figure 4- PCCARD.) 1. Remove the following screws securing the PC card slot. •...
Page 305 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B Installing the PC card slot The following describes the procedure for installing the PC card slot. (See Figure 4- PCCARD.) 1. Set the PC card slot while engaging the latch and secure it with the following screws. •...
Page 306: Smart Card Slot (Smart Card Model Only)
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B 4.25 Smart card slot (Smart card model only) Removing the Smart card slot The following describes the procedure for removing the Smart card slot. (See Figure 4- SMART.) 1.
Page 307 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B Installing the Smart card slot The following describes the procedure for installing the Smart card slot. (See Figure 4- SMART.) 1. Set the Smart card slot in place and connect the Smart card slot cable to the connector CN2170 on the system board.
Page 308: Battery Cable Holder
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.26 Battery cable holder Removing the Battery cable holder The following describes the procedure for removing the battery cable holder. (See Figure 4- 41.) 2. Remove the following screw and battery cable holder from the slot. •...
Page 309: Pen Holder Assembly
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.27 Pen holder assembly Removing the Pen holder assembly The following describes the procedure for removing the pen holder assembly. (See Figure 4- 42.) 1. Remove the pen holder assembly from the slot. Hole Pen holder assembly Guide...
Page 310: Sensor Board
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.28 Sensor board Removing the Sensor board The following describes the procedure for removing the sensor board. (See Figure 4-43.) 1. Remove the sensor board from the slot. 2. Disconnect the sensor cable from the connector on the sensor board. Sensor cable Sensor board Hole...
Page 311: Touch Pad
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.29 Touch pad Removing the Touch pad The following describes the procedure for removing the touch pad. (See Figure 4-44 to 4-46.) 1. Peel off the glass tapes. 2. Disconnect the relay cable from the connector on the touch pad. 3.
Page 312 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4. Disconnect the touch pad cable and relay cable from the connector on the button board. 5. Turn over the touch pad assembly and peel off the button board. CAUTION: Do not reuse the removed button board. Cable Connector Button board...
Page 313 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 6. Peel off the touch pad. CAUTION: Do not reuse the removed touch pad. Touch pad Figure 4-46 Removing the touch pad (3) PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-77...
Page 314 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Touch pad The following describes the procedure for installing the touch pad. (See Figure 4-44 to 4-46.) 1. Stick a new touch pad on the palm rest cover in place. CAUTION: When installing a new touch pad, follow the steps below.
Page 315 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.30 Speaker Removing the speaker The following describes the procedure for removing the speaker. (See Figure 4-47.) 1. Remove the speaker covers while releasing latches. 2. Peel off the acetate tapes and take the speakers out from the speaker slots. Speaker cover Latch Acetate tape...
Page 316 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the speaker The following describes the procedure for installing the speaker. (See Figure 4-47.) 1. Place the speakers to the slots on both sides. 2. Install the speaker covers to the slots on both sides while hooking the latches. 3.
Page 317: Hinge Assembly
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.31 Hinge assembly Removing the Hinge assembly The following describes the procedure for removing the hinge assembly. (See Figure 4-48 and 4-49.) 1. Release the cables from the guides of the cable holder. Cable Figure 4-48 Removing the hinge assembly (1) PORTÉGÉ...
Page 318 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Rev B W-LAN Antenna Cable(Black) 3G Antenna Cable (Red) W-LAN Antenna Cable(Gray) 3G Antenna Cable (Blue) W-LAN Antenna Cable(White) W-LAN Antenna Cable(Gray) 3G Antenna Cable (Blue) FWGAN PCB 3G Antenna Cable (Blue) Figure 4-49a Removing the hinge assembly (1) (3G model only) 4-82 [CONFIDENTIAL]...
Page 319 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 2. Remove the following screws and cable holder. • M2.5×10.0B FLAT HEAD screw ×2 3. Open the display at the right angle to the palm rest covers and turn the display clockwise 90 degrees and remove the hinge assembly.
Page 320 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Hinge assembly The following describes the procedure for installing the hinge assembly. (See Figure 4-48 and 4-49.) 1. Set the hinge spacer, hinge assembly and cable holder in place and secure them with the following screws.
Page 321: Lcd Unit/Touch Panel/Digitizer
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.32 LCD unit/Touch panel/Digitizer Removing the LCD unit/Touch panel/Digitizer The following describes the procedure for removing the LCD unit/touch panel/digitizer. (See Figure 4-50 to 4-54.) 1. Turn the display clockwise180 degrees and close the display on the palm rest cover. 2.
Page 322 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4. Remove the following screws securing the LCD assembly. • M2.0×4.0B ×4 S-THIN HEAD screw 5. Raise the top edge of the LCD assembly on the display cover. M2.0x4.0B S-THIN HEAD M2.0x4.0B S-THIN HEAD LCD assembly M2.0x4.0B...
Page 323 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 6. Turn up the insulator and peel off the glass tapes. 7. Disconnect the LCD cable and digitizer cable from the connectors on the back of the LCD unit. CAUTION: When removing the cables, be careful not to damage the connectors. 8.
Page 324 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich CAUTION: Read the following instructions before handling the touch panel. Touch panels are made of glass having sharp edges and corners; workers must wear gloves not to cut their fingers or skin when handling. Touch panels are made of glass;...
Page 325 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich The LCD mask must not touch any part of the transparent area; it will cause unexpected input. Inside edge of the LCD mask must be between the transparent area and the operation guaranteed active area.
Page 326 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 9. Peel off the glass tape and disconnect the touch panel cable from the connector on the LCD assembly. CAUTION: When removing the cable, be careful not to damage the connectors. 10.
Page 327 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich CAUTION: Read the following instructions before handling the Digitizer. Do not disassemble or modify the digitizer sensor unit; it may damage sensitive parts inside the digitizer sensor unit, and dusts or scratches may mar the device. Be careful of sharp edges of the sensor board;...
Page 328 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich To attain maximum performance, abide by the following precautions. a. Attach the digitizer sensor unit flat on the bottom surface of LCD panel. b. Affix three sides of the digitizer sensor unit to corners securely using single-coated or double-coated adhesive tape.
Page 329 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich The CMOS LSIs used in the digitizer sensor unit are very sensitive to ESD (Electro-Static Discharge). Person handling the digitizer sensor unit shall be grounded with wristband. Tools such as a soldering iron, screwdriver and working benches shall be grounded.
Page 330 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich There is a portion where the bezel is sticking out because of the digitizer guide. Do not press and rub the portion with bare hands or it may result cut your finger. Do not make any scratches on the B/L and TAB by the edge of the digitizer when installing the digitizer because it may result to break the TAB or make scratches on the B/L and cause display function failure.
Page 331 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Do not pull up the PCB hardly when installing the digitizer because it may result to give stress on the TAB or PCB and cause the display function failure. Make sure that three latches fit the digitizer securely. If the latches are not locked securely, it may result to move the digitizer and give stress on the TAB or PCB and cause the display function failure.
Page 332 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Do not put any instrument on the LCD module because it may result to make scratch on the cell, polarization sheet or B/L and break the TAB and may cause the display function failure.
Page 333 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Do not hold, press and rub the TAB because it may result to break the TAB and cause the display function failure. PORTÉGÉ M700/M750 Maintenance Manual (960-661) [CONFIDENTIAL] 4-97...
Page 334 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Make sure to put the LCD module on the flat place. If the LCD module is put on the uneven place, it may result to break the TAB, make scratch on the B/L or polarization sheet and cause the display function failure.
Page 335 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 11. Slide out the digitizer toward the arrow pointing while peeling off the digitizer of the LCD unit. (The digitizer is stuck on the LCD unit with double-sided tapes.) CAUTION: Do not reuse the removed digitizer. Digitizer Figure 4-55 Removing the digitizer PORTÉGÉ...
Page 336 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the LCD unit/Touch panel/Digitizer The following describes the procedure for installing the LCD unit/touch panel/digitizer. (See Figure 4-50 to 4-54.) CAUTION: When installing the LCD unit/touch panel/digitizer, be careful of the followings.
Page 337 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 1. Peel off separators of double-sided tapes on the back of a new digitizer. 2. Slide a new digitizer into the back pocket of the LCD and fix it with the double-sided tape.
Page 338 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Make sure the digitizer is inserted under the metal guides. Do not make a gap between the digitizer and LCD. Guide Guide Guide Guide 3. Set the LCD unit/digitizer on the touch panel and stick the acetate tapes in place. 4.
Page 339 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 7. Place the LCD assembly to the display cover and secure it with the following screws. • M2.0×4.0B ×4 S-THIN HEAD screw NOTE: For models with a digitizer and touch panel, be careful not to put the LCD cable under the metal plate of the touch panel.
Page 340 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 8. Set the LCD mask to the display cover while securing the latches. NOTE: When setting the LCD mask, wipe the LCD with a soft cloth and make the back of the LCD mask clean with an ionizer.
Page 341 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich NOTE: When replacing the LCD mask with a new one, stick a new black sheet in place. There are two types of black sheet, one type (for web camera model) masks the web camera portion, and the other (for no web camera model) does not mask the web camera portion.
Page 342: Switch Board/Fingerprint Sensor Board
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.33 Switch board/Fingerprint sensor board Removing the Switch board/Fingerprint sensor board The following describes the procedure for removing the switch board/fingerprint sensor board. (See Figure 4-55.) 1. Remove the following screw securing the switch board and pull up the switch board. •...
Page 343 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich Installing the Switch board/Fingerprint sensor board The following describes the procedure for installing the switch board/fingerprint sensor board. (See Figure 4-55.) 1. Connect the fingerprint sensor cable to the connector on the back of the fingerprint sensor board.
Page 344: Web Camera Board
Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.34 Web camera board Removing the Web camera board The following describes the procedure for removing the web camera board. (See Figure 4- 56.) 1. Disconnect the web camera cable from the connector on the web camera board and remove the web camera board.
Page 345 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich 4.35 Wireless LAN antenna/Internal microphone/Web camera cable Removing the Wireless LAN antenna/Internal microphone/Web camera cable Wireless LAN antennas/internal microphone/web camera cable are included in a LCD cover assembly (hinge assembly is also included). When the wireless LAN antennas or internal microphone or web camera cable are/is defective, replace with a new LCD cover assembly.
Page 346 Fehler! Formatvorlage nicht definiert. Fehler! Formatvorlage nicht definiert.Fehler! Formatvorlage nich LCD cover assembly M2.5x6.0B FLAT HEAD M2.5x6.0B FLAT HEAD Hinge assembly Figure 4-59a Removing the wireless LAN antenna/3G antenna/Internal microphone/webcamera cable(3G model only) Installing the Wireless LAN antenna/Internal microphone/Web camera cable The following describes the procedure for installing the LCD cover assembly.
Page 347 Appendices [CONFIDENTIAL]...
Page 348 Appendices App-ii [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661)
Page 349 Appendices Appendix Contents Appendix A Handling the LCD Module................A-1 Appendix B Board Layout ....................B-1 System board (FWGSY *) Front View ..............B-1 System board (FWGSY *) Back View..............B-3 System board (FWGNS *) Front View ..............B-5 System board (FWGNS *) Back View..............B-7 SW board (FWGSW*,FWGNW*) View ..............B-9 Finger Sensor board (FWGFS*,FWGNF*) View ..........B-10 Touch Pad board (FWGTP*,FWGNT*) View ............B-11...
Page 350 Appendices C.16 CN4611 USB(Port4) interface connector (4-pin) ..........C-19 C.17 CN4612 USB(Port0) interface connector (4-pin) ..........C-19 C.18 CN5080 CRT interface connector (15-pin) ............C-20 C.19 CN5601 LCD interface connector (34-pin) ............C-21 C.20 CN6060 Int MIC connector (2-pin) ..............C-22 C.21 CN6150 Speaker connector (4-pin) ..............C-22 C.22 CN8771 FAN interface connector (4-pin) ............C-22 C.23...
Page 351 Appendices Appendix D Keyboard Scan/Character Codes ..............D-1 Appendix E Key Layout.....................E-1 United Kingdom (UK) Keyboard ................E-1 United States (US) Keyboard................. E-1 Appendix F Wiring Diagrams ................... F-1 RGB Monitor Loopback Connector ..............F-1 RS-232C Loopback Connector ................. F-1 RS-232C direct connection cable (9-pin to 9-pin) .......... F-2 RS-232C direct connection cable (9-pin to 25-pin)........
Page 352 Appendices Figures Figure B-1 System board (FWGSY*) layout (front) ............B-1 Figure B-2 System board (FWGSY*) layout (back) ............B-3 Figure B-3 SW board (FWGSW*) layout (front/back) ...........B-5 Figure B-4 Finger Sensor board (FWGFS*) layout (front/back) ........B-6 Figure B-5 Touch Pad board (FWGTP*) layout (front/back) .........B-7 Figure B-6 Antenna board (FWGAN*) layout (front/back) ..........B-8 Figure B-7...
Page 353 Appendices System board Table C-1 SO-DIMM connector (200-pin) ...............C-1 Table C-2 SO-DIMM connector (200-pin) ...............C-4 Table C-3 SELECT BAY interface connector (72-pin)............C-7 Table C-4 HDD interface connector (11-pin) ..............C-8 Table C-5 PC Card interface connector (70-pin) ..............C-9 Table C-6 Smart Card interface connector (10-pin)............C-10 Table C-7 Docking interface connector (133-pin) ............C-11 Table C-8...
Page 354 Appendices Table C-31 Media Bridge interface connector (42-pin)............C-26 Table C-32 SIMM CARD SLOT (12-pin) ................C-27 SW board Table C-33 System board interface connector (15-pin) ............C-28 Finger Sensor board Table C-34 System board interface connector (6-pin) ............C-29 Touch Pad board Table C-35 Touch PAD interface connector (12-pin)............C-30 Table C-36 System board internal connector (8-pin)............C-30 Antenna board Table C-37 ANT interface connector (3-pin)..............C-31...
Page 355: Appendix A Handling The Lcd Module
Appendix A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assembly or disassembly. Observe the following precautions when handling the LCD module: 1.
Page 356 Appendices Appendix A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent.
Page 357 Appendix A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge.
Page 358 Appendices Appendix A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage. [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 359 Appendix A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassembly can cause malfunctions. 10. If you transport the module, do not use packing material that contains epoxy resin (amine) or silicon glue (alcohol or oxime). These materials can release gas that can damage the panel’s polarization.
Page 360 Appendices Appendix A Handling the LCD Module [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 361: Appendix B Board Layout
Appendix B Board Layout Appendices Appendix B Board Layout B.1 PORTÉGÉ M700 System board (FWGSY*) Front View Figure B-1 System board(FWGSY*) layout (front) PORTEGE M700/M750 Maintenance Manual (960-661)
Page 362 Appendices Appendix B Board Layout Table B-1 PORTÉGÉ M700 System board(F SY*) connectors (front) Number Name CN1400 Memory connector CN1900 HDD I/F connector CN2110 PC CARD I/F connector CN2170 Smart Card I/F connector(not used) CN2600 Mini PCI Express I/F connector (WLAN/WiMAX) CN2610 Mini PCI Express I/F connector (3G/Robsoan) CN3010...
Page 363 Appendix B Board Layout Appendices B.2 PORTÉGÉ M700 System board (FWGSY*) Back View Figure B-2 System board(F SY*) layout (back) [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 364 Appendices Appendix B Board Layout Table B-2 PORTÉGÉ M700 System board (F SY*) connectors and ICs (back) Number Name CN1410 Memory connector CN1820 SELECT BAY I/F connector CN2300 Docking I/F connector CN4230 1394 I/F connector CN4610 USB (Port6) I/F connector CN4611 USB (Port4) I/F connector CN4612...
Page 365 Appendix B Board Layout Appendices Rev D B.3 PORTÉGÉ M750 System board (FWGNS*) Front View Figure B-3 System board(FWGNS*) layout (front) [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 366 Appendices Appendix B Board Layout Table B-3 PORTÉGÉ M750 System board(F S*) connectors (front) Number Name CN1400 Memory connector CN1900 HDD I/F connector CN2110 PC CARD I/F connector CN2170 Smart Card I/F connector(not used) CN2600 Mini PCI Express I/F connector (WLAN/WiMAX) CN2610 Mini PCI Express I/F connector (3G/Robsoan) CN3010...
Page 367 Appendix B Board Layout Appendices B.4 PORTÉGÉ M750 System board (FWGNS*) Back View Figure B-4 System board(F S*) layout (back) [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 368 Appendices Appendix B Board Layout Table B-4 PORTÉGÉ M750 System board (F S*) connectors and ICs (back) Number Name CN1410 Memory connector CN1910 SELECT BAY I/F connector CN2300 Docking I/F connector CN4230 1394 I/F connector CN4610 USB (Port5) I/F connector CN1970 e-SATA &...
Page 369: Sw Board (Fwgsw*,Fwgnw*) View
Appendix B Board Layout Appendices B.5 SW board (FWGSW*,FWGNW*) View (front) (back) Figure B-5 SW board (FWGSW*) layout (front/back) Table B-5 board (F *) connector (front) Number Name System board I/F connector CN9542 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 370: Finger Sensor Board (Fwgfs*,Fwgnf*) View
Appendices Appendix B Board Layout B.6 Finger Sensor board (FWGFS*,FWGNF*) View (front) (back) Figure B-6 *) layout (front/back) Table B-6 *) connector ( Number Name CN9541 System board I/F connector B-10 [CONFIDENTIAL] PORTEGE M700/M750 Maintenance Manual (960-661) )
Page 371: Touch Pad Board (Fwgtp*,Fwgnt*) View
Appendix B Board Layout Appendices B.7 Touch Pad board (FWGTP*,FWGNT*) View (front) (back) Figure B-7 *) layout (front/back) Table B-7 *)connector (front) Number Name CN3241 Touch PAD I/F connector CN9570 System board I/F connector [CONFIDENTIAL] B-11 PORTEGE M700 Maintenance Manual (960-661)
Page 372 Appendices Appendix B Board Layout Rev B B.8 Antenna board (FWGAN*) View (3G model only) (front) (back) Figure B-8 Antenna board(F *) layout (front/back) Table B-8 *) connector ( Number Name CN2661 ANT I/F connector CN2662 3G I/F connector CN2663 WLAN I/F connector B-12 [CONFIDENTIAL]...
Page 373: Panel Sensor Board (Fwgpn*,Fwgnp*) View
Appendix B Board Layout Appendices B.9 Panel Sensor board (FWGPN*,FWGNP*) View (front) (back) Figure B-9 Panel Sensor board(F *) layout (front Table B-9 *) connector ( Number Name CN9531 System board I/F connector [CONFIDENTIAL] B-13 PORTEGE M700 Maintenance Manual (960-661)
Page 374 Appendix C Pin Assignments Appendices Appendix C Pin Assignments System board (FWGSY ) CN1400 SO-DIMM connector (200-pin) Table C-1 SO-DIMM connector (200-pin) (1/3) Pin No. Signal Name Pin No. Signal Name MRVREF-B0V ADQ04-B1P ADQ00-B1P ADQ06-B1P ADQ05-B1P ADM0-B1P ADQS0-B1N ADQS0-B1P ADQ07-B1P ADQ01-B1P ADQ03-B1P ADQ02-B1P...
Page 375: Appendix C Pin Assignments
Appendices Appendix C Pin Assignments Table C-1 SO-DIMM connector (200-pin) (2/3) Pin No. Signal Name Pin No. Signal Name ADQ28-B1P ADQ25-B1P ADQ29-B1P ADQ24-B1P ADM3-B1P ADQS3-B1N ADQS3-B1P ADQ30-B1P ADQ31-B1P ADQ27-B1P ADQ26-B1P MCKE0-B1P MCKE1-B1P 1R8-B1V 1R8-B1V ABS2-B1P AMA14-B1P 1R8-B1V 1R8-B1V AMA12-B1P AMA11-B1P AMA09-B1P AMA07-B1P AMA08-B1P...
Page 376 Appendix C Pin Assignments Appendices Table C-1 SO-DIMM connector (200-pin) (3/3) Pin No. Signal Name Pin No. Signal Name ADQ37-B1P ADQ39-B1P ADQ38-B1P ADQ34-B1P ADQ41-B1P ADQ45-B1P ADQ43-B1P ADQ44-B1P ADQS5-B1N ADM5-B1P ADQS5-B1P ADQ40-B1P ADQ42-B1P ADQ47-B1P ADQ46-B1P ADQ49-B1P ADQ48-B1P ADQ52-B1P ADQ53B1P XMCK1-B1P XMCK1-B1N ADQS6-B1N ADQS6-B1P ADM6-B1P...
Page 377: Cn1410 So-Dimm Connector (200-Pin
Appendices Appendix C Pin Assignments CN1410 SO-DIMM connector (200-pin) Table C-2 SO-DIMM connector (200-pin) (1/3) Pin No. Signal Name Pin No. Signal Name MRVREF-B0V BDQ01-B1P BDQ04-B1P BDQ05-B1P BDQ00-B1P BDM0-B1P BDQS0-B1N BDQS0-B1P BDQ02-B1P BDQ03-B1P BDQ07-B1P BDQ06-B1P BDQ13-B1P BDQ08-B1P BDQ09-B1P BDQ12-B1P BDM1-B1P BDQS1-B1N XMCK3-B1P BDQS1-B1P...
Page 378 Appendix C Pin Assignments Appendices Table C-2 SO-DIMM connector (200-pin) (2/3) Pin No. Signal Name Pin No. Signal Name BDQ24-B1P BDQ29-B1P BDQ25-B1P BDQ28-B1P BDM3-B1P BDQS3-B1N BDQS3-B1P BDQ30-B1P BDQ27-B1P BDQ31-B1P BDQ26-B1P MCKE3-B1P MCKE4-B1P 1R8-B1V 1R8-B1V BBS2-B1P BMA14-B1P 1R8-B1V 1R8-B1V BMA12-B1P BMA11-B1P BMA09-B1P BMA07-B1P BMA08-B1P...
Page 379 Appendices Appendix C Pin Assignments Table C-2 SO-DIMM connector (200-pin) (3/3) Pin No. Signal Name Pin No. Signal Name BDQ34-B1P BDQ35-B1P BDQ32-B1P BDQ33-B1P BDQ45-B1P BDQ46-B1P BDQ40-B1P BDQ41-B1P BDQS5-B1N BDM5-B1P BDQS5-B1P BDQ43-B1P BDQ42-B1P BDQ44-B1P BDQ47-B1P BDQ52-B1P BDQ53-B1P BDQ48-B1P BDQ49-B1P XMCK4-B1P XMCK4-B1N BDQS6-B1N BDQS6-B1P BDM6-B1P...
Page 380: Cn1820 Select Bay Interface Connector (72-Pin
Appendix C Pin Assignments Appendices CN1820 SELECT BAY interface connector (72-pin) Table C-3 SELECT BAY interface connector (72-pin) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 381: Cn1900 Hdd Interface Connector (11-Pin
Appendices Appendix C Pin Assignments CN1900 HDD interface connector (11-pin) Table C-4 HDD interface connector (11-pin) Pin No. Signal Name Pin No. Signal Name [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 382: Cn2110 Pc Card Interface Connector (70-Pin
Appendix C Pin Assignments Appendices CN2110 PC Card interface connector (70-pin) Table C-5 PC Card interface connector (70-pin)(1/2) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 383 Appendices Appendix C Pin Assignments C-10 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 384 Appendix C Pin Assignments Appendices CN2170 Smart Card interface connector (10-pin): not used Table C-6 Smart Card interface connector (10-pin) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-11...
Page 385: Cn2300 Docking Interface Connector (133-Pin
Appendices Appendix C Pin Assignments CN2300 Docking interface connector (133-pin) Table C-7 Docking interface connector (133-pin) (1/3) Pin No. Signal Name Pin No. Signal Name C-12 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 386 Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-13...
Page 387 Appendices Appendix C Pin Assignments Table C-7 Docking interface connector (133-pin) (2/3) Pin No. Signal Name Pin No. Signal Name C-14 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 388 Appendix C Pin Assignments Appendices PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-15...
Page 389 Appendices Appendix C Pin Assignments Table C-7 Docking interface connector (133-pin) (3/3) Pin No. Signal Name Pin No. Signal Name C-16 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 390: Cn2600 Mini Pci Express Interface Connector (52-Pin
Appendix C Pin Assignments Appendices C.8 CN2600 Mini PCI Express interface connector (52-pin) Table C-8 Mini PCI Express interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-17...
Page 391: Cn2610 Mini Pci Express Interface Connector (52-Pin
Appendices Appendix C Pin Assignments C.9 CN2610 Mini PCI Express interface connector (52-pin) Table C-9 Mini PCI Express interface connector (52-pin) Pin No. Signal Name Pin No. Signal Name C-18 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 392: Cn3010 Mdc Interface Connector (12-Pin
Appendix C Pin Assignments Appendices C.10 CN3010 MDC interface connector (12-pin) Table C-10 MDC interface connector (12-pin) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-19...
Page 393: Cn3230 Keyboard Interface Connector (34-Pin
Appendices Appendix C Pin Assignments C.11 CN3230 Keyboard interface connector (34-pin) Table C-11 keyboard interface connector (34-pin) Pin No. Signal Name Pin No. Signal Name C.12 CN3240 FWGTP* board interface connector (8-pin) Table C-12 FWGTP* board interface connector (8-pin) Pin No. Signal Name Pin No.
Page 394: Cn4230 1394 Interface Connector (4-Pin
Appendix C Pin Assignments Appendices C.13 CN4230 1394 interface connector (4-pin) Table C-13 1394 interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name C.14 CN4440 Bluetooth interface connector (10-pin) Table C-14 Bluetooth interface connector (10-pin) Pin No. Signal Name Pin No.
Page 395: Cn4610 Usb(Port6) Interface Connector (4-Pin
Appendices Appendix C Pin Assignments C.15 CN4610 USB (Port6) interface connector (4-pin) Table C-15 USB (Port6) interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name C.16 CN4611 USB (Port4) interface connector (4-pin) Table C-16 USB (Port4) interface connector (4-pin) Pin No.
Page 396: Cn5080 Crt Interface Connector (15-Pin
Appendix C Pin Assignments Appendices C.18 CN5080 CRT interface connector (15-pin) Table C-18 CRT interface connector (15-pin) Pin No. Signal Name Pin No. Signal Name PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-23...
Page 397: Cn5601 Lcd Interface Connector (34-Pin
Appendices Appendix C Pin Assignments C.19 CN5601 LCD interface connector (34-pin) Table C-19 LCD interface connector (34-pin) Pin No. Signal Name Pin No. Signal Name C-24 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 398: Cn6060 Int Mic Connector (2-Pin
Appendix C Pin Assignments Appendices C.20 CN6060 Int MIC connector (2-pin) Table C-20 Int MIC connector (2-pin) Pin No. Signal Name Pin No. Signal Name C.21 CN6150 Speaker connector (4-pin) Table C-21 Speaker connector (4-pin) Pin No. Signal Name Pin No. Signal Name SPOTL-PXN C.22 CN8771 FAN interface connector (4-pin)
Page 399: Cn9300 Rtc Battery Connector(3-Pin
Appendices Appendix C Pin Assignments C.24 CN9300 RTC battery connector (3-pin) Table C-17 RTC battery connector (3-pin) Pin No. Signal Name Pin No. Signal Name C.25 CN9530 FWGPN* board interface connector (4-pin) Table C-25 FWGPN* board interface connector (4-pin) Pin No. Signal Name Pin No.
Page 400: Cn9540 Fwgfs* Board Interface Connector(41-Pin
Appendix C Pin Assignments Appendices C.26 CN9540 FWGFS* board interface connector (41-pin) Table C-26 FWGFS* board interface connector (41-pin) Pin No. Signal Name Pin No. Signal Name C.27 J4100 LAN interface connector (8-pin) Table C-27 LAN interface connector (8-pin) Pin No. Signal Name Pin No.
Page 401 Appendices Appendix C Pin Assignments C-28 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 402: J6070 Ext Mic Connector(6-Pin
Appendix C Pin Assignments Appendices C.28 J6070 Ext MIC connector (6-pin) Table C-28 EXT MIC connector (6-pin) Pin No. Signal Name Pin No. Signal Name C.29 J6310 HP JACK (6-pin) Table C-29 HP JACK (6-pin) Pin No. Signal Name Pin No. Signal Name C.30 J8800 DC-IN connector (4-pin)
Page 403: Is2140 Media Bridge Interface Connector(42-Pin
Appendices Appendix C Pin Assignments C.31 IS2140 Media Bridge interface connector (42-pin) Table C-31 Media Bridge interface connector (42-pin) Pin No. Signal Name Pin No. Signal Name MSDAT2-P3P MSDAQT3-P3P MSBS-P3P FM-P3V MSCLK-P3P MSDAT3-P3P MSCD-P3N MSDAT2-P3P MSSDIO-P3P MSDAT1-P3P MSBS-P3P FM-P3V MSCLK-P3P MSSDIO-P3P MSDAT1-P3P FM-P3V...
Page 404 Appendix C Pin Assignments Appendices C.32 IS2630 SIMM CARD SLOT (12-pin) : not used Table C-32 SIMM CARD SLOT (12-pin) Pin No. Signal Name Pin No. Signal Name UIPWRL-E3V UIRSTL-E3P UICLKL-E3P UIML-GND UIDATL-E3P 3GSLCH-E2N PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-31...
Page 405: Sw Board (Fwgsw*)
Appendices Appendix C Pin Assignments SW board (FWGSW*) C.33 CN9542 System board interface connector (15-pin) Table C-33 System board interface connector (15-pin) Pin No. Signal Name Pin No. Signal Name GPBTNA-S3N GPBTNB-S3N PWRW-S3N KBRT00-S3N KBRT01-S3N KBRT02-S3N KBRT03-S3N KBRT04-S3N KBRT05-S3N KBRT06-S3N KBSC16-S3N C-32 [CONFIDENTIAL]...
Page 406: Finger Sensor Board (Fwgfs*)
Appendix C Pin Assignments Appendices Finger Sensor board (FWGFS*) C.34 CN9541 System board interface connector (6-pin) Table C-34 System board interface connector (6-pin) Pin No. Signal Name Pin No. Signal Name FGSPON-S3N ZUSBFS-E3N ZUSBFS-E3P PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL] C-33...
Page 407: Touch Pad Board (Fwgtp*)
Appendices Appendix C Pin Assignments Touch Pad board (FWGTP*) C.35 CN3241 Touch PAD interface connector (12-pin) Table C-35 Touch PAD interface connector (12-pin) Pin No. Signal Name Pin No. Signal Name IPDCLK-P5P IPDCLK-P5P C.36 CN9570 System board interface connector (8-pin) Table C-36 System board interface connector (8-pin) Pin No.
Page 408: Antenna Board (Fwgan*)
Appendix C Pin Assignments Appendices Rev B Antenna board (FWGAN*): (3G model only) C.37 CN2661 ANT interface connector (3-pin) Table C-37 ANT interface connector (3-pin) Pin No. Signal Name Pin No. Signal Name (FL2660-2) C.38 CN2662 3G interface connector (3-pin) Table C-38 3G interface connector (3-pin) Pin No.
Page 409: Panel Sensor Board (Fwgpn*)
Appendices Appendix C Pin Assignments Panel Sensor board (FWGPN*) C.40 CN9531 System board interface connector (4-pin) Table C-40 System board interface connector (4-pin) Pin No. Signal Name Pin No. Signal Name TPLOFR-S3N PNLOFR-S3N C-36 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 410 Appendix D Keyboard Scan/Character Codes Appendices Appendix D Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (1/4) Code set 1 Code set 2 Keytop Note Make Break Make Break ‘ ~ 7 & BkSp PORTEGE Maintenance Manual (960-6 ) [CONFIDENTIAL]...
Page 411 Appendices Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (2/4) Code set 1 Code set 2 Keytop Note Make Break Make Break \ ¦ Caps Lock ‘ “ Enter Shift (L) No.102 , < .
Page 412 Appendix D Keyboard Scan/Character Codes Appendices Table D-1 Scan codes (set 1 and set 2) (3/4) Code set 1 Code set 2 Keytop Note Make Break Make Break Ctrl Alt (L) Space ALT (R) ← Home ↑ ↓ PgUp PgDn →...
Page 413: Appendix D Keyboard Scan/Character Codes
Appendices Appendix D Keyboard Scan/Character Codes Table D-1 Scan codes (set 1 and set 2) (4/4) Code set 1 Code set 2 Keytop Note Make Break Make Break PrintSc Refer to table 2-25 Pause Refer to table 2-25 Notes: 1. * Scan codes differ by overlay function. 2.
Page 414 Appendix D Keyboard Scan/Character Codes Appendices Table D-2 Scan codes with left Shift key Code set 1 Code set 2 Make Break Make Break E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E0 4A E0 F0 4A E0 12 E0 AA E0 52 E0 D2 E0 2A E0 F0 12 E0 70 E0 F0 70 E0 12 E0 AA E0 53 E0 D3 E0 2A E0 F0 12 E0 71 E0 F0 71 E0 12 ←...
Page 415 Appendices Appendix D Keyboard Scan/Character Codes Table D-3 Scan codes in Numlock mode Code set 1 Code set 2 Make Break Make Break E0 2A E0 52 E0 D2 E0 AA E0 12 E0 70 E0 F0 70 E0 F0 12 E0 2A E0 53 E0 D3 E0 AA E0 12 E0 71 E0 F0 71 E0 F0 12 ←...
Page 416 Appendix D Keyboard Scan/Character Codes Appendices Table D-5 Scan codes in overlay mode Code set 1 Code set 2 Keytop Make Break Make Break (–) Table D-6 No.124 key scan code Code set 1 Code set 2 Shift Make Break Make Break Prt Sc Common E0 2A E0 37 E0 B7 E0 AA E0 12 E0 7C E0 F0 7C E0 F0...
Page 417 Appendices Appendix D Keyboard Scan/Character Codes Table D-7 No.126 key scan code Shift Code set 1 Code set 2 Make Make Pause Common E1 1D E1 F0 Ctrl* E0 46 7E E0 F0 *: This key generates only make codes. [CONFIDENTIAL]PORTEGE Maintenance Manual (960-6...
Page 418: Appendix E Key Layout
Appendix E Key Layout Appendices Appendix E Key Layout United Kingdom (UK) Keyboard Figure E-1 UK keyboard United States (US) Keyboard Figure E-2 US keyboard PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 419 Appendices Appendix E Key Layout Canadian French Keyboard Figure E-4 Canadian French keyboard [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 420: Appendix F Wiring Diagrams
Appendix F Wiring diagrams Appendices Appendix F Wiring diagrams RGB Monitor Loopback Connector Figure F-1 RGB Monitor Loopback Connector LAN Loopback Connector Figure F-2 LAN Loopback Connector PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 421 Appendices Appendix F Wiring diagrams [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 422: Appendix G Bios Rewrite Procedures
Appendix G BIOS rewrite procedures Appendices Appendix G BIOS rewrite procedures This Appendix explains how to rewrite the system BIOS program when you update the system BIOS. Tools To rewrite the BIOS, you need the following tool: BIOS/EC/KBC rewriting disk for the computer that has renewed BIOS data. Rewriting the BIOS 1.
Page 423 Appendices Appendix G BIOS rewrite procedures [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 424: Appendix H Ec/Kbc Rewrite Procedures
Appendix H EC/KBC rewrite procedures Appendices Appendix H EC/KBC rewrite procedures This Appendix explains how to rewrite the EC/KBC system program when you update the EC/KBC system. Tools To rewrite the EC/KBC, you need the following tool: EC/KBC rewriting disk for the computer Rewriting the EC/KBC NOTE: 1.
Page 425 Appendices Appendix H EC/KBC rewrite procedures [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)
Page 426: Appendix I Reliability
Appendix I Reliability Appendices Appendix I Reliability The following table shows MTBF (Mean Time Between Failures). Table I-1 MTBF Time (hours) MTBF 6,272.78* * In the case of the model corresponding to AMT and Robson PORTEGE M700 Maintenance Manual (960-661) [CONFIDENTIAL]...
Page 427 Appendices Appendix I Reliability [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)

This manual is also suitable for:

Portégé m750 M750 - portege - core 2 duo 2.53 ghz

Toshiba PORTÉGÉ M700 Maintenance Manual

Table of Contents

Chapter 1 Hardware Overview

Table of Contents

Chapter 2 Troubleshooting Procedures

Table of Contents

Chapter 3 Tests and Diagnostics

Table of Contents

Chapter 4 Replacement Procedures

Table of Contents

Appendix

Appendix A Handling the LCD Module

Appendix Contents

Appendix B Board Layout

Appendix C Pin Assignments

Appendix D Keyboard Scan/Character Codes

Appendix E Key Layout

Appendix F Wiring Diagrams

Appendix G BIOS Rewrite Procedures

Appendix H EC/KBC Rewrite Procedures

Appendix I Reliability

Quick Links

Chapters

Troubleshooting

Related Manuals for Toshiba PORTÉGÉ M700

Summary of Contents for Toshiba PORTÉGÉ M700