Toshiba PORTÉGÉ M700 Maintenance Manual page 68

2 Troubleshooting Procedures
4. Boot the computer in DOS mode.
5. Execute GETDPORT.COM in the text menu in CPU REAL mode. (Insert the FD for
starting D port into FDD and input "FD starting drive:>dport".)
The D port status is displayed in the following form;
5. When the D port status is FFFF (normal status), go to Procedure 4. When the D port
status falls into any other status than FFFF, go to Procedure 3.
6. Cancel short-circuit for W3400 after the end of a test.
2-20 [CONFIDENTIAL] PORTEGE M700 Maintenance Manual (960-661)