Toshiba PORTÉGÉ M700 Maintenance Manual page 221

10. PCI Bus
This option displays the interrupt level for the Card Bus in the computer. It is for
information only and cannot be changed.
PCI BUS
11. Display
This group of options configures the computer's display.
(a) Power On Display
This option is used to select the display when booting up.
Auto-Selected
LCD+AnalogRGB
NOTE: Pressing Fn+F5 changes the display setting in the order of internal LCD to
simultaneous to external monitor.
12. Peripheral
Use this option to select the peripheral's mode.
(a) Internal Pointing Device
This option enables or disables the touch pad
Enabled
Disabled
13. LEGACY EMULATION
(a) USB KB/Mouse Legacy Emulation
This option sets the Legacy support condition of the USB keyboard and the USB
mouse.
Enabled
Disabled
PORTEGE M700 Maintenance Manual (960-661)
= Serial IRQ10, IRQ11
Selects an external monitor if one is connected.
Otherwise it selects the internal LCD. (Default)
Selects both the internal LCD and the external monitor
for simultaneous display.
Enables the touch pad. (Default)
Disables the touch pad.
Enables support. (Default)
LEGACY
USB keyboard/USB mouse are available without the driver.
Disables LEGACY supportUSB-FDD Legacy Emulation
Tests and Diagnostics
[CONFIDENTIAL] 3-99