Toshiba PORTÉGÉ M700 Maintenance Manual page 267

4.12 Wireless LAN card/Robson card
Installing the Wireless LAN card/Robson card
To install the wireless LAN card/Robson card, follow the steps below. (See Figure 4-21 to 4-
23.)
CAUTION: Be sure to switch the computer off before installing the wireless LAN card.
Otherwise, the computer or the wireless LAN card may be damaged.
1. Insert the wireless LAN card to the connector on the system board slantwise and
press it to connect firmly.
2. Secure the wireless LAN card with the following screws.
• M2.0×4.0B
3. Connect the wireless LAN antenna cables (white: 1, black: 2, gray: 3) to the
connectors on the wireless LAN card.
NOTE: Connector 3 (for the gray cable) is placed on the center.
For models without wireless LAN, fix the antenna cables to the place where the
wireless LAN card is mounted (for wireless LAN model) with the glass tape.
4. Insert the Robson card to the connector on the system board slantwise and press it to
connect firmly and secure it with the following screws.
• M2.0×4.0B
5. Stick a new insulator in place.
PORTÉGÉ M700 Maintenance Manual (960-661)
S-THIN HEAD screw
S-THIN HEAD screw
4 Replacement Procedures
×2
×2
[CONFIDENTIAL] 4-39