4 Replacement Procedures
2. Remove the following screws and cable holder.
• M2.5×10.0B FLAT HEAD screw
3. Open the display at the right angle to the palm rest covers and turn the display
clockwise 90 degrees and remove the hinge assembly.
4. Remove the hinge spacer.
M2.5×10.0B FLAT HEAD
Hinge spacer
4-82
[CONFIDENTIAL]
Hinge assembly
Figure 4-50 Removing the hinge assembly (2)
×2
Cable holder
PORTÉGÉ M700 Maintenance Manual (960-661)
4.31 Hinge assembly