Vision Fitness R70 Service Manual page 61

CHAPTeR 8: bike SPeCifiCATioNS AND ASSeMbly GUiDe
8.3 ASSeMbly iNSTRUCTioNS - CoNTiNUeD
STeP 4 - GReeN bAG
1) remove the two socket head bolts from the sliding seat adjustment bracket. Slide the seat adjustment handle between the teeth of the seat
adjustment bracket. re-insert the two socket head bolts and tighten with the 4mm l-Shaped Allen wrench.
2) Attach the seat frame to the sliding seat bracket using four lock washers (M8) and four bolts (M8 x 20l) and the 5mm t-Shaped wrench.
3) Connect wires A on the seat handlebar to wires B on the sliding seat bracket. Connect the wire harness coming from the seat frame to the
wire harness in the handlebars. Attach the seat handlebars to the sliding seat bracket using four lock washer (M8) and four bolts (M8 x 20l).
tighten with the 5mm t-Shaped Allen wrench.
57