CHAPTeR 7: PART RePlACeMeNT GUiDe
7.22 loWeR CoNTRol boARD RePlACeMeNT
1) remove the left rear side cover as outlined in Section 7.21. .
2) remove the 3 screws holding the cover onto the lower control board (Figure A).
3) Disconnect the 3 wires that are plugged into the lower control board (Figure B).
fiGURe A
fiGURe b
4) remove the 2 screws attaching the lower control board to the frame (Figure C).
fiGURe C
5) reverse Steps 1-4 to install a new lower control board.
6) test the bike for function as outlined in Section 7.23.
50