CHAPTeR 6: TRoUbleSHooTiNG
6.6 TRoUbleSHooTiNG - PeDAlS SliPPiNG
SliPPiNG WHile PeDAliNG
PoSSible CAUSeS
1) Belt tension is not enough.
2) the one way bearing in the secondary pulley axle is damaged.
SolUTioN:
1) remove the right side cover and check the drive belt tension. tighten as needed.
2) If the belt tension is correct and the belt is still slipping, the one way bearing in the secondary pulley axle is damaged. replace the
secondary pulley axle assembly.
22