CHAPTeR 7: PART RePlACeMeNT GUiDe
7.4 CoNSole MAST RePlACeMeNT
1) remove the console as outlined in Section 7.2.
2) remove the stationary handlebar as outlined in Section 7.3.
3) lift up the console mast boot (Figure A).
fiGURe A
4) remove the 6 screws attaching the console mast to the frame bracket (Figure B).
fiGURe b
5) remove the console mast while simultaneously pulling the wire harness and hr wires out the bottom of the mast.
6) reverse Steps 1-5 to install a new console mast.
7) test the bike for function as outlined in Section 7.23.
28