Download
Share
Print this page
Vision Fitness R2200 Assembly Manual
  1. Manuals
  2. Brands
  3. Vision Fitness Manuals
  4. Exercise Bike
  5. R2200
  6. Assembly manual

Vision Fitness R2200 Assembly Manual

Vision fitness semi-recumbent fitness cycle assemby guide
Hide thumbs Also See for R2200:
1
2
3
4
5
6
7
8

Advertisement

Quick Links

See also: Owner's Manual
A s s e m b l y
G u i d e
R2200
R2200HRT
AND
SEMI-RECUMBENT FITNESS CYCLE

Advertisement

loading

Related Manuals for Vision Fitness R2200

Summary of Contents for Vision Fitness R2200

  • Page 1 A s s e m b l y G u i d e R2200 R2200HRT SEMI-RECUMBENT FITNESS CYCLE...
  • Page 2 A s s e m b l y G u i d e R2200 AND R2200HRT SEMI-RECUMBENT FITNESS CYCLE To avoid possible damage to this Fitness Cycle, please follow these assembly steps in the correct order. Before proceeding, find your new Fitness Cycle’s serial number located on the front axle tube, and enter here: Refer to this number when calling for service, and enter this serial number on your Warranty Card and in your own records.
  • Page 3 TOOLS & PARTS INCLUDED 15mm Pedal Wrench 5mm Allen Wrench 6mm L-Shaped Wrench 4mm L-Shaped Wrench Screwdriver 5mm L-Shaped Wrench PARTS BOX Console Mast Cover, Qty: 1 Pedals, Qty: 2 Power Supply, Qty: 1 Water Bottle & Cage, Qty: 1 Heart Rate Chest Strap ( R2200HRT Only ) Color-coded Hardware Bags Owner’s Guide...

  • Page 4: Hardware Included

    HARDWARE INCLUDED ORANGE BAG BLUE BAG M8 x 65L Screw M6 x 55L Screws Quantity: 2 Quantity: 8 M8 Lockwashers M8 x 20L Screws M6 Lockwashers Quantity: 4 Quantity: 2 M8 x 20L Quantity: 8 Socket-head Cap Screw Quantity: 4 PINK BAG M8 Lockwashers M8 x 15L Screws...
  • Page 5 ORANGE BAG STEP • Slide the rear foot into place on the frame. Secure the foot in place with two screws (M8x20) and two lock washers (M8) to the outside holes and with two screws (M8x65) and two lock washers (M8) to the inside holes. Tighten with the blue-handled 5mm allen wrench.
  • Page 6 (A) exiting its center to the heart rate wires (B) com- ing from the seat frame. R2200 • Mount the seat handlebars to the seat frame with four screws (M8x15L) and four lock washers (M8). Tighten with the 5mm allen wrench.

  • Page 7: Console Assembly

    (M8x15) and four lock washers (M8) Cover to the sides of the console mast brack- et. Use the 5mm L-shaped wrench to R2200 secure the last screw (M8x15) to the edge of the bracket facing the seat. Tighten only until snug.
  • Page 8 Tighten with the 15mm pedal wrench. 500 South CP Avenue • P.O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www.visionfitness.com ©2005 Vision Fitness. All Rights Reserved. 1.05 Part #Z22RB42D-AG AG18.16PRD REV4 PEDALS...

This manual is also suitable for:

R2200hrt