Testing The Bike - Vision Fitness R70 Service Manual

CHAPTeR 7: PART RePlACeMeNT GUiDe

7.23 TeSTiNG THe bike

onCe the UnIt or rePlACeMent PArt IS FUllY InStAlleD AnD ASSeMBleD AnD
ProPerlY PlACeD on the Floor, USe the FollowInG InStrUCtIonS to teSt
the MAChIne:
1) without hitting start or entering any program modes, sit on the bike and hold the handlebars while pedaling to simulate exercising. while
moving, listen for any odd noises or squeaks.
2) After stopping movement, press the StArt button and begin pedaling.
3) Grasp the hand grips to check for proper heart rate response. Check to make sure that the StArt and enter keys are functional.
4) Press the level up and down buttons on both the console and hand grips to make sure resistance is fully functional.
5) If everything functions properly, stop pedaling and the unit will reset to normal operation within 30 seconds.
51