Vision Fitness R70 Service Manual page 59

CHAPTeR 8: bike SPeCifiCATioNS AND ASSeMbly GUiDe
8.3 ASSeMbly iNSTRUCTioNS - CoNTiNUeD
STeP 2 - blUe bAG
1) Slide the console mast boot onto the console mast.
2) Unfold the wire harness and heart rate wires located in the console mast frame bracket. Attach the wire tie coming from the bottom of the
console mast to the wire harness and heart rate wires. Pull the wire tie with the wire harness and heart rate wires up through the top of the
console mast while simultaneously sliding the mast into the frame bracket.
3) Secure the mast to the frame bracket with six bolts (M8 x 15l). tighten with the 5mm t-Shaped Allen wrench. Insert a set screw (M10 x
12l) into the front edge of the mast and tighten until snug with the 5mm t-Shaped Allen wrench.
4) Slide the console mast boot down and set it in place on the side cover.
55