Chapter 2: Important Safety Instructions; Before Getting Started - Vision Fitness R70 Service Manual

CHAPTeR 2: iMPoRTANT SAfeTy iNSTRUCTioNS

2.1 befoRe GeTTiNG STARTeD

the Vision Fitness r70 Bike is intended for commercial use. to
ensure your safety and protect the equipment, read all instructions
before operating the bike.
ChooSInG A SIte
the site should be well lit and well ventilated. locate the Vision
Fitness r70 Bike on a structurally solid and flat surface. the bike
should have a clearance of 20" on one side and behind the unit, and
12" on the other side from the wall or other equipment. this zone is
to allow easy access to the bike and gives the user an easy exit path
from the machine. If the site has a heavy plush carpet, to protect
the carpeting and machinery, you should place a rigid plastic base
under the unit.
Please do not place the Vision Fitness r70 Bike in an area of high
humidity, such as the vicinity of a steam room, indoor pool, or sauna.
exposure to intensive water vapor or chlorine could adversely affect
the electronics, as well as other parts of the machine.
2
MoVInG the BIKe
Your Vision Fitness r70 bike has transport wheels included for
ease of mobility. to move your recumbent Bike, firmly grasp the
rear of the frame assembly, or the rear of the seat rail. Carefully lift
and roll on the transport wheels.
CAUtIon:
Vision Fitness bikes are well built and heavy, use care and
additional help if necessary. this bike can weigh up to 160 lbs.