The 'Configuration' Tab In The Océ Express Webtools; Configure The Network Settings In The Océ Express Webtools - Oce ColorWave 600 User Manual

The 'Configuration' tab in the Océ Express
WebTools
Configure the network settings in the Océ Express
WebTools
How to configure the network settings in the Océ Express WebTools
Click 'Configuration' - 'Network' - 'Adapter 1, TCP/IP'.
1.
Click 'Edit' in the group bar to access the 'Edit' window. You can edit all the settings
2.
of the 'Adapter 1, TCP/IP' group in one window.
or
To edit only one setting in the 'Adapter 1, TCP/IP' group, click a single setting value
3.
in the expanded list.
Note: Log on as System administrator or Power user in the Océ Express
WebTools.
For example, click 'Enable DHCP' to display a window where you can change the
setting.
Note: This window also contains a short explanation of the setting.
Click 'Configuration' - 'Network' - 'Adapter 1, hardware settings' and edit the settings
4.
if necessary.
Click 'Ok' to confirm you entries or 'Cancel' to reject your entries.
5.
Configure the network settings in the Océ Express WebTools
109