Adjusting The Rear Wheel Static Balance; Installing The Rear Wheel Sensor (Xp500A) - Yamaha XP500 Service Manual

2
a
b
1
REAR WHEEL AND BRAKE DISC
3
c
d
4 - 22
EAS00575
ADJUSTING THE REAR WHEEL STATIC
BALANCE
NOTE:
• After replacing the tire, wheel or both, the
rear wheel static balance should be adjusted.
• Adjust the rear wheel static balance with the
brake disc and rear wheel drive hub
installed.
1. Adjust:
• rear wheel static balance
Refer to "ADJUSTING
WHEEL STATIC BALANCE".
INSTALLING THE REAR WHEEL SENSOR
(XP500A)
1. Install:
• rear wheel
NOTE:
• Align the slot a of the sensor housing 1
with the projection b of the collar 2, and
then assemble them.
• Align the slot c of the collar with the rib d of
the swingarm 3, and then assemble them.
CAUTION:
Make sure there are no foreign materials in
the wheel hub. Foreign materials cause
damage to the inner sensor rotor and rear
wheel sensor.
CHAS
THE FRONT