Yamaha XP500 Service Manual page 34

Tool No.
Flywheel puller
90890-01362
YU-33270-B
This tool is used to remove the A.C. mag-
neto rotor.
Fork seal driver weight Fork seal driver weight
90890-01367
Fork seal driver attachment (41 mm)
YM-A5142-4
Fork seal driver
These tools are used to install the oil
attachment
seal, dust seal, and the outer tube bush-
90890-01381
YM-A5142-2 ing of a front fork leg.
Steering nut wrench
90890-01403
YU-33975
This tool is used to loosen or tighten the
steering ring nuts.
Oil filter wrench
90890-01469
This tool is needed to loosen or tighten
the oil filter cartridge.
Sheave holder
90890-01481
This tool is used to hold the sheave
assembly when removing or installing the
primary and secondary sheave.
Clutch spring compressor
90890-01482
This tool is used to remove or install the
nut.
Sheave holder
90890-01701
YS-01880-A
This tool is used to hold the A.C. magneto
rotor.
Micrometers (50 ~ 75 mm)
90890-03008
YU-03008
This tool is used to measure the piston
skirt diameter.
Tool name/Function
1 - 23
SPECIAL TOOLS
GEN
INFO
Illustration