Installing The Primary Sheave Assembly; Secondary Sheave Assembly And V-Belt - Yamaha XP500 Service Manual

b
1
2
a
V-BELT AUTOMATIC TRANSMISSION
c
3
2
d
6. Tighten:
• secondary sheave spring seat nut
NOTE:
Attach the sheave spring compressor 2 onto
the secondary sheave as shown.
Then compress the spring, and tighten the
secondary sheave spring seat nut 1 with lock-
nut wrench 3.
Sheave spring compressor 2
90890-04134, YM-04134
Locknut wrench 3
90890-01348, YM-01348
Sheave fixed block 4
90890-04135, YM-04135
INSTALLING THE PRIMARY SHEAVE
ASSEMBLY, SECONDARY SHEAVE
ASSEMBLY AND V-BELT
1. Install:
• V-belt case air duct joint clamp 1
• V-belt case air duct 2
NOTE:
• Align the projection a in the V-belt case air
duct 2 with the slot b on the V-belt case air
duct joint clamp 1.
• Align the projection c in the V-belt case air
duct joint clamp 1 with the slot d in the right
crankcase cover 3.
5 - 67
ENG
90 Nm (9.0 m · kg, 65 ft · lb)