Yamaha XP500 Service Manual page 279

FRONT FORK
5. Tighten:
• damper rod assembly bolt 1
Damper rod assembly bolt
23 Nm (2.3 m · kg, 17 ft · lb)
LOCTITE
NOTE:
• Apply the locking agent (LOCTITE
threads of the damper rod assembly bolt.
• While holding the damper rod with the
damper rod holder 2 and T-handle 3,
tighten the damper rod assembly bolt.
Damper rod holder
90890-01294, YM-01300
T-handle
90890-01326, YM-01326
6. Install:
• outer tube bushing 1
• washer 2
(with the fork seal driver weight 3 and fork
seal driver attachment 4)
Fork seal driver weight
90890-01367, YM-A5142-4
Fork seal driver attachment
(41 mm)
90890-01381, YM-A5142-2
7. Install:
• oil seal 1
(with the fork seal driver weight 2 and fork
seal driver attachment 3)
CAUTION:
Make sure that the numbered side of the oil
seal faces up.
4 - 81
CHAS
®
New
New
®
) to the