Checking And Lubricating The Cables; Lubricating The Levers; Lubricating The Centerstand - Yamaha XP500 Service Manual

CHECKING AND LUBRICATING THE CABLES/

LUBRICATING THE LEVERS/

LUBRICATING THE CENTERSTAND

3 - 60
EAS00170
CHECKING AND LUBRICATING THE
CABLES
The following procedure applies to all of the
cable sheaths and cables.
WARNING
Damaged cable sheaths may cause the
cable to corrode and interfere with its
movement. Replace
sheaths and cables as soon as possible.
1. Check:
• cable sheath
Damage → Replace.
2. Check:
• cable operation
Unsmooth operation → Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
NOTE:
Hold the cable end upright and pour a few
drops of lubricant into the cable sheath or use
a suitable lubricating device.
EAS00171
LUBRICATING THE LEVERS
Lubricate the pivoting point and metal-to-metal
moving parts of the levers.
Recommended lubricant
Lithium-soap-based grease
EAS00173
LUBRICATING THE CENTERSTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the centerstand.
Recommended lubricant
Lithium-soap-based grease
CHK
ADJ
damaged cable