Removing The Transmission; Checking The Transmission - Yamaha XP500 Service Manual

TRANSMISSION

REMOVING THE TRANSMISSION

1. Remove:
• left crankcase
Refer to "CRANKCASE AND CRANK-
SHAFT".
2. Remove:
• secondary shaft 1
• main axle 2
• drive axle 3
• primary driven gear 4
• first wheel gear 5
• first pinion gear
EAS00425

CHECKING THE TRANSMISSION

1. Measure:
• main axle runout
(with a centering device and dial gauge)
Out of specification → Replace the main
axle.
Maximum main axle runout
0.08 mm (0.0031 in)
2. Measure:
• drive axle runout
(with a centering device and dial gauge)
Out of specification → Replace the drive
axle.
Maximum drive axle runout
0.08 mm (0.0031 in)
3. Measure:
• secondary shaft runout
(with a centering device and dial gauge)
Out of specification → Replace the second-
ary shaft.
Maximum secondary shaft runout
0.08 mm (0.0031 in)
5 - 85
ENG