Yamaha XP500 Service Manual page 255

1
a
a
2
3
1
FRONT AND REAR BRAKES
2. Install:
• brake caliper piston 1
Turn the brake caliper piston clockwise until
section a of the brake caliper piston is level
with the surface of the brake caliper body.
NOTE:
1
Align the recesses b in the brake caliper pis-
ton with the brake caliper body as shown in the
illustration.
b
3. Install:
• brake caliper bracket
4. Install:
• brake caliper 1 (temporarily)
• copper washers
• brake hose 2
• union bolt 3
_
Proper brake hose routing is essential to
insure safe vehicle operation. Refer to
"CABLE ROUTING" in chapter 2.
CAUTION:
When installing the brake hose onto the
brake caliper, make sure the brake pipe
touches the projection a on the brake cali-
per.
5. Remove:
• brake caliper
4 - 57
40 Nm (4.0 m · kg, 29 ft · lb)
New
30 Nm (3.0 m · kg, 22 ft · lb)
WARNING
CHAS