Yamaha XP500 Service Manual page 157

CLEANING THE V-BELT CASE AIR FILTER ELEMENT
2
3. Remove:
• V-belt case air filter element (left) 1
• V-belt case air filter element (right) 2
4. Clean:
• V-belt case air filter element
Apply compressed air to the inner surface
of V-belt case air filter element.
5. Check:
• V-belt case air filter element
Damage → Replace.
CAUTION:
Since the V-belt case air filter element is a
dry type, do not let grease or water contact
it.
6. Install:
• V-belt case air filter element (right)
• V-belt case air filter cover
• V-belt case cover 2
• V-belt case air filter element (left)
7. Install:
• left footrest board
• left upper side cover mole
Refer to "SIDE COVER MOULDINGS AND
LEG SHIELD".
3 - 36
CHK
ADJ
7 Nm (0.7 m · kg, 5.1 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)
7 Nm (0.7 m · kg, 5.1 ft · lb)