System Event; Figure 54 - Text-In Actions Screen - Eneo DLR-2016/500V Operating Instructions Manual

Highlight the box beside Line Delimiter, and press the
that the device uses to indicate the end of a line. Special characters can be created using ^ and a capital letter; e.g., ^J
for NL (New Line), ^M for CR (Carriage Return). Refer to the device manufacturer's documentation for Line Delimiter
character(s).
Highlight the box beside Ignore String, and press the
text that you want the DVR to ignore. Refer to the device manufacturer's documentation for text strings that the device
sends during transactions, so you will know which ones you do not want recorded.
Highlight the Case Sensitive box, and press the
manufacturer's documentation to determine if the text strings are Case Sensitive. If the device distinguishes between
upper and lower case letters, make certain the Case Sensitive box is turned On.
Highlight the box beside Time Out, and press the
The DVR will consider a transaction complete if no new text strings are entered between the last text input and the
dwell time out. You can adjust the Time Out dwell from 5 seconds to 15 minutes.
Highlight the Actions tab, and the Text-In Actions setup screen appears.
Figure 54 — Text-In Actions screen.
Highlight the box beside Alarm-Out and press the
as many Alarm-Outs with the Text Input as you wish. When the DVR detects text input, it triggers output signals on
all the associated Alarm-Out connectors. You can also have the DVR's internal buzzer sound if text input is detected.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Highlight the box beside Notify and press the
Notification and pressing the
and pressing the button. Highlight OK and press the
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and
the DVR should be registered in the RAS (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the
preset positions for each PTZ camera, where you want PTZ cameras to move to when the DVR detects text input.

System Event

Highlight System Event in the Event menu and press the
button. Use the virtual keyboard to enter the character(s)
button. Use the virtual keyboard to enter any strings of
button to toggle between On and Off. Refer to the device
button. Set the length of time to wait for the new text string.
The DVR can be set to react to text input. Text input can be
associated with cameras, trigger an Alarm-Out connector,
sound the DVR's internal buzzer, notify a number of different
devices, and/or move PTZ cameras to preset positions.
Highlight the box beside Record and press the
A list of cameras appears. You can associate as many cameras
with the Text Input as you wish. If the DVR detects text input,
it starts recording video from all the associated cameras.
NOTE: For the Record action, the camera you select
button. A list of Alarm Outputs appears. You can associate
button. You can toggle the entire list On and Off by highlighting
button. You can toggle the individual items On and Off by highlighting that item
16-Channel Digital Video Recorder
should be set to the Event or Time & Event
recording mode in the Record Schedule setup
screen.
button to accept your changes.
button. A list of PTZ presets appear. Select the
button. The System Event setup screen appears.
button.
43