Video Blind; Figure 48 - Video Loss Settings Screen; Figure 49 - Video Loss Actions Screen - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual
Figure 48 — Video Loss Settings screen.
Highlight the Actions tab, and the Video Loss Actions setup screen appears.
Figure 49 — Video Loss Actions screen.
Highlight the box under the Alarm-Out heading and press the
associate as many Alarm-Outs with that camera as you wish. When the DVR detects video loss on the selected camera,
it will trigger output signals on all the associated Alarm-Out connectors. You can also have the DVR's internal buzzer
sound if video is lost on the selected camera.
NOTE: For the Alarm-Out action, the alarm output and beep you select should be set to the Event mode in the
Alarm-Out setup screen (Schedule tab).
Highlight the box under the Notify heading and press the
highlighting Notification and pressing the
that item and pressing the
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and
the DVR should be registered in the RAS (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the
preset position for each PTZ camera, where you want PTZ cameras to move to when the DVR detects video loss on
the selected camera's input.

Video Blind

Highlight Video Blind in the Event menu and press the
40
Highlighting the box under the Video Loss Interval heading
allows you to set the duration of a signal loss before the DVR
will report a Video Loss. The DVR will not consider any signal
loss from a camera to be a Video Loss if the detected signal
loss is shorter than the interval set on this screen.
Highlight Use Ignoring Time and press the
toggle between On and Off. When set to On, the DVR will
ignore video loss events occurring during the preset period.
Highlighting Time Setup and pressing the
you to set up event ignoring time.
The DVR can be set to react to video loss differently for each
camera. Each camera can be associated with another camera,
trigger an Alarm-Out connector, sound the DVR's internal
buzzer, notify a number of different devices, and/or move
PTZ cameras to preset positions.
Highlight the box under the Record heading and press the
as many cameras with that camera as you wish. If the DVR
detects video loss on the selected camera, it starts recording
video from all the associated cameras.
NOTE: For the Record action, the camera you select
button. You can toggle the individual items On and Off by highlighting
button. Highlight OK and press the
button. A list of cameras appears. You can associate
should be set to the Event or Time & Event
recording mode in the Record Schedule setup
screen.
button. A list of Alarm Outputs appears. You can
button. You can toggle the entire list On and Off by
button to accept your changes.
button. A list of PTZ presets appear. Select the
button. The Video Blind setup screen appears.
button to
button allows