Text-In; Figure 52 - Text-In Settings Screen; Figure 53 - Text-In Device Screen - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual
NOTE: For the Notify action, the notify item you select should be enabled in the Notification setup screen and
the DVR should be registered in the RAS (Remote Administration System).
Highlight the desired box under the PTZ heading, and press the
the preset position for each PTZ camera, where you want PTZ cameras to move to when the DVR detects video blind
on the selected camera's input.

Text-In

Highlight Text-In in the Event menu and press the
Figure 52 — Text-In Settings screen.
Figure 53 — Text-In Device screen.
Highlight the box beside Text-In Product, and press the
NOTE: The following description is for a Generic Text Device. The screen changes for different types of text
input devices, and there will be different parameter boxes for you to enter information.
Highlight the box beside Transaction Start, and press the
Start string. Refer to the device manufacturer's documentation for the text string that the device first sends when a
transaction starts.
If you want the DVR to react to any character sent from the text input device, you will want to turn On Any Character.
Highlight Any Character, and press the
NOTE: If Any Character is turned On, you will not be able to enter any text in the Transaction Start box.
Highlight the box beside Transaction End, and press the
End string. Refer to the device manufacturer's documentation for the text string that the device sends when a transaction
ends.
Highlight the more line(s) box, and press the
the DVR to record. You can choose from 0 to 10.
42
button. A list of PTZ presets appears. Select
button. The Text-In setup screen appears.
The DVR can be set to react to text input from devices such
as ATMs (Automated Teller Machines) and POS (Point of
Sale; i.e., cash registers). This screen allows you to configure
the DVR for each text-in device.
Highlight the box under the Setup heading, and press the
button. Selecting the Setup heading changes all the parameters
excluding Port settings of all the text input channels.
NOTE: The system performance might be affected when
a large quantity of text inputs are detected from
several channels at the same time.
Highlight the box beside Port, and press the
from None, RS232, RS485, USB-Serial (1~8) and LAN (1~16).
NOTE: If you have set the Port as None, you will not be able
to make any changes to the screen.
NOTE: When using the USB to serial text-in device, do NOT
remove the USB cable from the port while the system
is running.
NOTE: Text-in data might be lost when the text-in buffer is
filled by simultaneous text-in transactions from
all 16 LAN channels.
Highlight Setup..., and press the
or POS manufacturer's recommended settings when configuring
the RS232, RS485, USB-Serial or LAN ports.
button. Select your device from the list.
button. Use the virtual keyboard to enter the Transaction
button to toggle between On and Off.
button. Use the virtual keyboard to enter the Transaction
button. Select the number of additional lines of text that you want
button. Select
button. Use the ATM