Search Button; Display Button; Panic Button; Usb Port - Eneo DLR-2016/500V Operating Instructions Manual

Search Button

Pressing the button enters the search mode, and pressing the button again exits the search mode. When entering
SEARCH
the search mode, video is paused. Pressing the
displays when the DVR is in the Pause mode and the screen displays
In the Live Monitoring mode and Search mode, pressing and holding the
allows you to copy video clips.
When in one of the multi-view formats, pressing this button enters the Triplex mode. The DVR supports the Triplex
function: monitoring, recording and playing back at the same time.

Display Button

Pressing the button toggles between different display formats. The available formats are: PIP, 2x2, 1+5, 1+7,
DISPLAY
3x3 and 4x4.

Panic Button

Pressing the button starts panic recoding of all camera channels, and displays
PANIC
button again will stop panic recording.

USB Port

Two USB ports on the front panel are provided to connect external hard disk or flash drives for video clip copying or
system upgrades. Position external drives close enough to the DVR so that you can make the cable connections, usually
less than 6 feet. Use the USB cable provided with the hard disk drive to connect it to the DVR.
A USB mouse (not supplied) can be connected to one of the ports. You can use the mouse to navigate through the
screens and menus much like you would on a computer.
A USB to Serial converter can be connected to the USB port. Multiple text-in devices can be used with a USB to Serial
converter.
(Play/Pause) button plays back video at regular speed. The screen
when the DVR is playing back video.
SEARCH
16-Channel Digital Video Recorder
button for three seconds or longer
on the screen. Pressing the
9