Chapter 2 - Installation; Package Contents; Required Installation Tools; Video Input - Eneo DLR-2016/500V Operating Instructions Manual

Chapter 2 — Installation

Package Contents

The package contains the following:
Digital Video Recorder
Power Adaptor and Power Cord
User's Manual (This Document)
RAS Software CD and User's Manual
Infrared Remote Control

Required Installation Tools

No special tools are required to install the DVR. Refer to the installation manuals for the other items that make up part
of your system.

Video Input

RS232 Port
Network Port
Your DVR can be used with either NTSC or PAL equipment.
NOTE: You cannot mix NTSC and PAL equipment. For example you cannot use a PAL camera and an NTSC
monitor.
Video Input
Connect the coaxial cables from the video sources to the BNC Video In connectors.
Figure 2 — DVR rear panel.
Video Out
RS485 Port
Factory Reset Switch
16-Channel Digital Video Recorder
Power Cord Connector
Alarm Input/Output
Factory Reset Switch
3