Record Table Search; Figure 66 - Record Table Search Screen - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual

Record Table Search

< Compact View >
< Standard View >
< Expanded View >
Figure 66 — Record Table Search screen.
There are three view modes. Standard view, Expanded view and Compact view. Standard view (default) displays
combined recording information of all camera channels currently displayed on the screen. In the Standard view mode,
selecting the icon located at the bottom switches to the Expanded view mode. The Expanded view displays the
recording information of each camera channel currently displayed on the screen. Selecting the
view mode switches to the Compact view mode which displays only the toolbar. Selecting the
view mode switches to the Standard view mode, and selecting the
Standard view mode.
Selecting or located at the bottom zooms the record table. Selecting
and selecting displays 24 hours (3-minute based) at once. To move to earlier or later times that are not shown in the
current record table screen, select the arrows located at the end of the times by using the arrow buttons on the front panel.
NOTE: If the DVR has images recorded in more than one recording mode in the same time range, the recording
status bar displays recording information in the following priority order: Panic
Time. The color of the bar indicates different recording modes: Red for Panic, Yellow for Pre-Event,
Purple for Event, and Blue for Time.
Selecting located at the bottom displays the Calendar Search screen. See the following Calendar Search section for
details.
Selecting located at the bottom displays the Search menu.
Go To: Displays the first or last recorded image, or searches by date and time (see the previous
Searching Video – Go To section of this chapter for more details).
Clip-Copy: Clips a video segment and saves it (see the following Clip Copy section for more details).
Zoom: Zooms the current playback image.
Slow Play: Plays video at low speed (x1/2, x1/3, x1/4, x1/6 and x1/8).
NOTE: Playing video at low speed will be supported for video recorded 10 images or more per second.
The individual playback controls at the bottom perform the following functions as described below:
Go to the previous image
Fast backward play
Selecting in the top-left corner exits the Record Table Search screen.
56
Recording information about video images currently displayed
on the screen displays on the recording status bar. A grey
vertical line indicates the current search position. To search
specific video, move the vertical line by using the Left or Right
arrow buttons on the front panel or by clicking the mouse on
the desired segment.
If the DVR's time and date have been reset to a time that is
earlier than some recorded video, it is possible for the DVR to
have more than one video stream in the same time range. In
this case, the overlapping time range in the record table will
be separated by a yellow vertical line .
NOTE: The recorded data in the time range located after
the yellow vertical line is the latest.
icon in the Expanded view mode switches to the
displays eight hours (1-minute based),
Play/Pause
Fast forward play
icon in the Standard
icon in the Compact
Pre-Event Event
Go to the next image