Figure 63 - Select Playback Camera Menu - Eneo DLR-2016/500V Operating Instructions Manual

User's Manual
The DVR supports the Triplex function: monitoring, recording and playing back at the same time. Pressing the
button when in one of the multi-view formats enters the Triplex mode and displays the Select Playback Camera menu.
Selecting All Channels plays back video of all cameras. The DVR maintains the same display format
as it does in the live mode except for the PIP format. You can also change the screen layout in the same
way as you do in the live mode.
Selecting the camera number under Triplex enters the Triplex mode and plays back video of the selected
camera. When in the single-screen display format, the camera currently displayed on the screen will
be selected and when in the PIP display format, the camera displayed on the PIP screen will be selected
for the search channel. During the Triplex mode, the DVR maintains the same display format as it does
in the live mode. A red outline surrounding the video and the camera title indicates the search channel.
While in the Triplex Mode, the DVR continues recording cameras as they were set up in the recording
schedule. Also, live monitoring will continue except for the camera that has been selected for playback.
Figure 63 — Select Playback Camera menu.
When playing video for the first time, the DVR will display the most recent image. When playing video subsequent
times, the DVR will start playing video from the last recalled image.
NOTE: Only the administrator and users with Covert Camera View authority can view video from covert cameras.
The covert cameras in the playback mode are determined by the current camera settings.
Camera Buttons (1 to 16): Pressing the individual camera buttons will cause the selected camera to display full screen.
Arrow Buttons: Pressing the
playback speed from
,
button again toggles the playback speed from
moves to the next image and pressing the
Play/Pause Button: Pressing the
Cameo Button: Pressing and holding the
outline surrounding the video indicates the active cameo, and pressing the arrow buttons moves the active cameo.
Pressing the desired camera button in the active cameo edits the cameo and displays the video of selected camera.
Pressing the (Play/Pause) button exits the Active Cameo mode. Selecting Exit Group Edit in the cameo menu
displayed when pressing the
NOTE: A cameo is defined as any cell within multi-screen display. The cameo mode allows you to change the
screen layout by editing the cameo.
Search Button: Pressing the
mode. When entering the search mode, video is paused. Pressing the
regular speed. The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is
playing back video.
Zoom Button: Pressing the
DISPLAY Button: Pressing the
3x3 and 4x4.
GROUP Button: Pressing the
group, and the screen displays page number.
You can use a mouse for convenient playback control. Position the mouse pointer on the playback screen, and the
following Record Table Search (Compact View Mode) screen will display. The individual controls on the toolbar perform
the following functions as described below:
52
button plays video backward at high speed. Pressing the button again toggles the
and . Pressing the
, and
button moves to the previous image.
button plays back images at regular speed or pauses playing video.
button for three seconds or longer enters the cameo mode. The yellow
MENU
button also exits the Active Cameo mode.
MENU
button enters the search mode, and pressing the button again exits the search
SEARCH
button zooms in the current image on the screen.
ZOOM
button toggles different display formats. The available formats are: 2x2,
DISPLAY
button changes the screen from the current camera group to the next camera
GROUP
button plays video forward at high speed. Pressing the
. When in the pause mode, pressing the
(Play/Pause) button plays back video at
SEARCH
button