Event - System Event - Eneo DLR1.1-04N/250V Operating Instructions Manual

Setup menu (continued)
Event – System Event
On the "System Event" menu the self-diagnostics and corresponding messages are configured..
Setup Menu...
Term
System
Check Recording
Check Alarm-In
Setup
Term
Schedule On
No.
Day
Range
Interval
X
+
Setup Menu...
Term
Disk Bad Notify
Disk Almost Full Notify
Disk S.M.A.R.T.
DLR1.1-04/xxxV
Event System Event
Symbol Meaning
System self-diagnostics interval
Setup... . Configuration of schedule >>
Interval for checking Alarm Inputs
Symbol Meaning
Enables schedule entries
Number of schedule entry
Day of the week
Time range at 15-minute intervals
Checking interval
Delete schedule entry
Set up schedule entry
Event System Event
Symbol Meaning
Percentage of bad sectors on hard disk as from which an alarm
is triggered
Percentage hard disk space available as from which "Disk
Almost Full" alarm is triggered
Input of the temperature threshold (in degrees centigrade or
Fahrenheit) for the data carrier S.M.A.R.T. test.
If the temperature limit is exceeded an alarm is triggered.
For details of your hard disk's temperature limit refer to the
manufacturer's manual.
Health Check
Storage
51