Arrow Buttons; Menu Button; Playback Buttons; Panic Button - Eneo DLR-2016/500V Operating Instructions Manual

Arrow Buttons

These buttons are used to navigate through menus and GUI. You can also use them to change numbers by highlighting
a number in the menu and using the Up and Down arrow buttons to increase or decrease the number's value. These
buttons are also used to control Pan and Tilt when in the PTZ mode.
When in the PIP display format, pressing the Up and Down arrow buttons moves the position of the small screen
counter-clockwise and clockwise.
Pressing the Left and Right buttons moves through screen pages in the Live Monitoring mode and Search mode.

Menu Button

In the Live Monitoring mode and Search mode, pressing the
screen. Pressing the button also hides the menu icons. During menu setup, pressing the button closes the current
.
menu or setup dialog box

Playback Buttons

Rewind: Pressing the
speed from and
,
Play/Pause: Pressing the
The screen displays when the DVR is in the Pause mode and the screen displays when the DVR is playing back
video.
Fast Forward: Pressing the
playback speed from ,
Stop: Pressing the button stops playback and enters the Live Monitoring mode.
Backward: When in the pause mode, pressing the
Forward: When in the pause mode, pressing the
In the Live Monitoring mode, pressing any playback button enters to the Search mode.

Panic Button

Pressing the button starts panic recoding of all camera channels, and displays
PANIC
button again will stop panic recording.

Layout Button

Pressing the button toggles between different display formats. The available formats are: 4x4, 3x3, 1+7, 1+5,
LAYOUT
2x2 and PIP.

Zoom Button

Pressing the button zooms the current image on the screen. A PIP with a rectangle temporarily displays showing
ZOOM
what area of the screen has been enlarged. You can use the arrow buttons to move the rectangle to another area.

PTZ Button

Pressing the button enters the PTZ (Pan/Tilt/Zoom) mode which allows you to control properly configured cameras.
PTZ

Enter Button

The (Enter) button selects a highlighted item or completes an entry that you have made during system setup. This
button is also used to enter the Cameo mode in the Live Monitoring mode or Search mode.
button plays video backward at high speed. Pressing the button again toggles the playback
.
button plays back video at regular speed and pressing the button again pauses video.
button plays video forward at high speed. Pressing the button again toggles the
and .
16-Channel Digital Video Recorder
button displays the menu icons at the top of the
MENU
button moves to the previous image.
button moves to the next image.
on the screen. Pressing the
11